High Pressure Motor Valves - Home | Kimray Mobile - Kimray, Inc.

HIGH PRESSURE MOTOR VALVES REPAIR MANUAL
HPMV DISSASEMBLY
STEP 3
SPRING
Remove Pivot from top of the spring plate
(Figure 3.1)
Remove Spring Plate from top of the
Spring (Figure 3.2)
Remove the spring from top Spring Plate
(Fig. 3.3)
Figure 3.1 Figure 3.2
STEP 4
DIAPHRAGM PLATE
Figure 3.3
BOLTED DIAPHRAGM NUT:
Spin the Diaphragm plate in a counter
clock wise direction loosing it from the
Upper Stem while holding the Upper Stem
with a small crescent wrench (Fig. 4.1).
If the HPMV has screws holding the
Diaphragm, use a screw driver to remove
them (Fig. 4.2)
Figure 4.1 Figure 4.2
Remove the Diaphragm Nut from the
Diaphragm Plate (Fig. 4.3)
Remove the Diaphragm from the
Diaphragm Plate (Fig. 4.4)
THREADED DIAPHRAGM NUT:
Use a pair of piers to remove the
Diaphragm Nut (Fig. 4.5)
Figure 4.3 Figure 4.4
Remove the Diaphragm from the
Diaphragm Plate (Fig. 4.6)
Figure 4.5 Figure 4.6
Page 10
www.kimray.com