High Pressure Motor Valves - Home | Kimray Mobile - Kimray, Inc.

More documents

Recommendations

Info

HIGH PRESSURE MOTOR VALVES REPAIR MANUAL PISTON BALANCED DISASSEMBLY STEP 1 ADJUSTING SCREW Use a wrench to remove the Adjusting Screw on top of the Bonnet (Fig. 1.1) STEP 2 BONNET Remove the bolts in the interface between the Bonnet and the Yoke (Fig. 2.1) Figure 1.1 Remove Breather Plug from Bonnet (Fig. 2.2) Figure 2.1 Figure 2.2 Remove Bonnet from Yoke (Fig. 2.3) STEP 3 SPRING Remove Pivot and the Spring Plate from top of the Spring (Fig. 3.1) Figure 2.3 Remove the spring from top Spring Plate (Fig. 3.2) STEP 4 DIAPHRAGM PLATE Spin the Diaphragm plate in a counter clock wise direction loosening it from the Upper Stem while holding the Upper Stem with a small crescent wrench (Fig. 4.1). Remove the Diaphragm Nut from the Diaphragm Plate (Fig. 4.2) Figure 3.1 Figure 3.2 Figure 4.1 Figure 4.2 Page 28 www.kimray.com
HIGH PRESSURE MOTOR VALVES REPAIR MANUAL PISTON BALANCED DISASSEMBLY Remove the Diaphragm from the Diaphragm Plate (Fig. 4.3) STEP 5 TRAVEL INDICATOR Remove the bolts from the Travel Indicator Block (Fig. 5.1) Remove the Coupling Block (Fig. 5.2) STEP 6 YOKE ASSEMBLY Use a wrench to remove the bolts from Yoke (Fig. 6.1) Slide out the Yoke from Body (Fig. 6.2) Flip Yoke upside down and remove the Upper Stem from the Lower Adjusting Screw (Fig. 6.3) Take a socket and remove the Lower Adjusting Screw with an impact gun (Fig. 6.4) Remove the outside O-Ring from the Lower Adjusting Screw (Fig. 6.5) Remove O-Ring from the inside of the Lower Adjusting Screw (Fig. 6.6) www.kimray.com Page 29
Page 1 and 2: Repair Manual High Pressure Motor V
Page 3 and 4: HIGH PRESSURE MOTOR VALVE REPAIR MA
Page 5 and 6: HIGH PRESSURE MOTOR VALVES REPAIR M
Page 29: HIGH PRESSURE MOTOR VALVES REPAIR M
Page 43: HIGH PRESSURE MOTOR VALVES REPAIR M

High Pressure Motor Valves - Home | Kimray Mobile - Kimray, Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?