High Pressure Motor Valves - Home | Kimray Mobile - Kimray, Inc.

More documents

Recommendations

Info

HIGH PRESSURE MOTOR VALVES REPAIR MANUAL NOTES Page 18 www.kimray.com
HIGH PRESSURE MOTOR VALVES REPAIR MANUAL HPMV ASSEMBLY STEP 1 DIAPHRAGM ASSEMBLY CASE 1 BOLTED DIAPHRAGM NUT: Tighten Diaphragm Base Plate in Vice (Fig. 1.1) Insert Diaphragm on the Diaphragm Plate aligning holes with both parts (Fig. 1.2) Figure 1.1 Figure 1.2 Insert Diaphragm Plate in to Base Plate making sure holes are aligned (Fig. 1.3) Use gasket sealant material to dip each screw in before putting in hole. Tighten screws in a criss-cross pattern and then retighten very tight (Fig. 1.4) CASE 2 THREADED DIAPHRAGM NUT: Figure 1.3 Figure 1.4 Tighten Diaphragm Plate in vice and insert Diaphragm on the Diaphragm Plate (Fig. 1.5) Grease the Diaphragm inside edge (Fig. 1.6) Figure 1.5 Figure 1.6 Insert the Diaphragm Nut and use a pair of pliers to tighten (Fig. 1.7) Note: Make sure the Diaphragm does not wrinkle. STEP 2 STUFFING BOX ASSEMBLY Insert Wiper in the Stuffing Box (Fig. 2.1) Figure 1.7 Insert the retainer with the sharp edge on top (Fig. 2.2) Figure 2.1 Figure 2.2 www.kimray.com Page 19
Page 1 and 2: Repair Manual High Pressure Motor V
Page 3 and 4: HIGH PRESSURE MOTOR VALVE REPAIR MA
Page 5 and 6: HIGH PRESSURE MOTOR VALVES REPAIR M
Page 19: HIGH PRESSURE MOTOR VALVES REPAIR M
Page 43: HIGH PRESSURE MOTOR VALVES REPAIR M

High Pressure Motor Valves - Home | Kimray Mobile - Kimray, Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?