High Pressure Motor Valves - Home | Kimray Mobile - Kimray, Inc.

HIGH PRESSURE MOTOR VALVES REPAIR MANUAL
HPMV ASSEMBLY
Insert bolts on top of the Bonnet and tighten
them with the impact gun (Fig. 5.11)
Grease the Adjusting Screw (Fig. 5.12)
Figure 5.11 Figure 5.12
Place the Pivot on top of the Adjusting
Screw and grease the top part of the Pivot
(Fig. 5.13 and 5.14)
Figure 5.13 Figure 5.14
Screw the Adjusting Screw on top of
Bonnet and tighten it with an adjustable
wrench (Fig. 5.15 and 5.16)
STEP 6
BLOCK
When you assemble the Block, make sure
the bevels are in the same side of the
block as show in (Fig. 6.1)
Figure 5.15 Figure 5.16
Place the threaded Half Block on the back
side (Fig. 6.2)
Figure 6.1 Figure 6.2
Tighten the bolts in the Block with a
socket (Fig. 6.3)
Make sure the Travel Indicator tag shows
the correct operation of the valve either
PO or PC (Fig. 6.4)
Figure 6.3 Figure 6.4
Page 24
www.kimray.com