NVC in Block Laying and Concreting - NBTE

NVC in Block Laying and Concreting (Draft)
12-15
2.5 Outline the operational
and safety precautions to be
observed when fixing
claddings.
2.6 specify mortar for fixing
stone, concrete and granite
claddings
2.7 Explain the need for
protection after fixing
claddings
2.8 Describe methods of
storing and handling
claddings on site.
• Organize and execute
under supervision the
various operations in
fixing cladding
• Emphasis safety
habits in handing
claddings.
• Illustrate the various
methods of fixing
cladding
• Specify and prepare
mortar for fixing the
various claddings.
General Objective 3.0: Understand the principles of pre -mixed General Objective 3.0: Apply textured rendering
renderings
Week Specific Objective: Teachers Activities: Resources: Specific Objective: Teachers Activities Resources
3.1 Describe the composition
of tyrolean and state the
properties of the base
• Present samples of
tyrolean and sandtex to
the students
• Tyrolean
• Sandtex,
Water
3.1 Apply santexttrowel
and santex-matt
according to the
*Guide trainee in the
application of
sandtext and
• Tyrolean
machine
• cement,
15-19
suitable for its application.
marker’s instruction tyrolean coating
3.2 describe te method of • Estimate the quantity
Sand,
application and cunning
tyrolean
3.3 Estimate the quantity of
tyrolean required for a
specified job
of tyrolean required for
a specified job.
3.2 Execute the
following operations in
the application of
tyrolean;
sandtext
material
Water
•
77