Royal Sweden Manual â English - People of Lava

oyal Sweden 

THE Non compromise TELEVISION 

for the image connoisseur 

LCD TV 

Operating Instructions 

Royal Sweden models: LD-40NLH-S, LD-40NLH-B, LD-46NLH-S, LD-46NLH-B, LD-55NLH-S, LD-55NLH-B

Thank you from People of Lava 

Thank you! 

At People of Lava we love what we do. 

We love creating new, yet timeless designs. We love integrating the best possible technologies to 

create new experiences. We love creating beautiful top-quality products, that work fantastically well, 

and that we hope will contribute to your everyday satisfaction and enjoyment. 

Nothing gives us more pleasure than when our customers feel as we do. Therefore, we would like to 

extend our warm Thanks for this opportunity to welcome you as People of Lava! 

If you have any questions or comments - please do not hesitate to contact us! 

Sincere regards, 

People of Lava 

Sweden 

We have the complete RS-232 and IR-codes available for your installation needs. Please contact us and 

we will send them to you! 

CAUTION 

RISK OF ELECTRIC SHOCK 

DO NOT OPEN 

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT 

REMOVE COVER (OR BACK). NO USER-SERVICEABLE 

PARTS INSIDE. REFER SERVICING TO QUALIFIED 

SERVICE PERSONNEL. 

This symbol is intended to alert the user to the presence of uninsulated 

“dangerous voltage” within the product’s enclosure that may be of sufficient 

magnitude to constitute a risk of electric shock to persons. 

This symbol is intended to alert the user to the presence of important operating 

and maintenance (servicing) instructions in the literature accompanying the 

appliance. 

WARNING 

To reduce the risk of fire or shock hazard, do not expose the TV to rain or moisture. 

NOTICE 

• If the same pattern is continuously displayed on the Monitor/ TV for a long 

period of time, it can be the situation when the image “Sticks” to screen. 

• The apparatus shall not be exposed to dripping or splashing and no object 

filled with liquids, such as vases, shall be place on the apparatus

Content 

Content 

English 

■ Conformity.............................................................................................................................................................3 

■ Unpacking and Setup........................................................................................................................................4 

Scope of Supply / Safety..................................................................................................................................................... 4 

Location / Intended Purpose............................................................................................................................................. 6 

■ Viewing the Control Panels.............................................................................................................................7 

Front View / Rear View......................................................................................................................................................... 7 

■ Remote Control...................................................................................................................................................9 

Remote Control ..................................................................................................................................................................... 9 

■ Connections and Start of Operation.........................................................................................................10 

Connections Roof Top Aerial...........................................................................................................................................10 

Connecting on-board Digital Tuner .............................................................................................................................10 

Connecting to the Roof Aerial or Cable Reception.................................................................................................10 

Connecting to Headphones............................................................................................................................................10 

Connecting to the HDMI Connection..........................................................................................................................11 

Connecting to External Devices with Component Input......................................................................................11 

Connecting Camcorders and Video Games...............................................................................................................12 

Connecting the AV Out Connection.............................................................................................................................12 

Connecting to a Computer..............................................................................................................................................13 

Connecting the Digital Audio Output..........................................................................................................................13 

Connecting Several Devices............................................................................................................................................14 

Control Port Connection(Service Only).......................................................................................................................14 

Inserting the CI Slot/ Connecting Main Cable...........................................................................................................15 

Inserting the Batteries........................................................................................................................................................16 

■ Settings................................................................................................................................................................17 

Switching On / Switching Off..........................................................................................................................................17 

Setting up for Operation...................................................................................................................................................17 

Open, Select and Close Menus.......................................................................................................................................18 

Tuning (Analogue TV)........................................................................................................................................................18 

Change Program..................................................................................................................................................................19 

Set Color System..................................................................................................................................................................19 

Set System..............................................................................................................................................................................20 

Change Channel..................................................................................................................................................................20 

Fine Tuning.............................................................................................................................................................................20 

Change Channel Name......................................................................................................................................................21 

Sound Setting.......................................................................................................................................................................21 

Improve Signal Qualitty.....................................................................................................................................................22 

Set Channel............................................................................................................................................................................23 

Reduce Noise.........................................................................................................................................................................23 

Set Screen Language..........................................................................................................................................................23 

Set Aspect Ratio ..................................................................................................................................................................24 

Favourite Input.....................................................................................................................................................................24 

Set Picture Mode..................................................................................................................................................................25 

Audio Settings......................................................................................................................................................................27 

Adjust Individual Audio Frequencies...........................................................................................................................28 

Adjust Medium and Low Frequencies.........................................................................................................................28 

1

Content 

Set the Audio Input.............................................................................................................................................................28 

Set Sound Source................................................................................................................................................................29 

Set TV Speaker......................................................................................................................................................................30 

Set Time...................................................................................................................................................................................31 

Set Switch on Time/ Set Switch off Time.....................................................................................................................31 

Set Sleep Time.......................................................................................................................................................................32 

Automatic Swich off...........................................................................................................................................................32 

Reduce Energy......................................................................................................................................................................33 

Set-on Screen Display........................................................................................................................................................33 

Child Lock...............................................................................................................................................................................34 

Set Characters for Teletext................................................................................................................................................35 

Removing the Judder.........................................................................................................................................................35 

Set Miscellaneous / Set Geometry.................................................................................................................................36 

Setting for the Computer..................................................................................................................................................37 

■ DTV Setting........................................................................................................................................................37 

Setting up Digital Television Tuner................................................................................................................................37 

DTV Searching......................................................................................................................................................................38 

Manual Search......................................................................................................................................................................39 

Edit Channel List..................................................................................................................................................................40 

Edit Favourite Channels.....................................................................................................................................................40 

Setting the Antenna Power..............................................................................................................................................41 

Setting up the Parental Control......................................................................................................................................41 

Changing the Password....................................................................................................................................................42 

Setting the Menu Language............................................................................................................................................42 

Setting the Menu Display Time......................................................................................................................................43 

Setting the GMT Offset......................................................................................................................................................43 

Selecting the Time Zone...................................................................................................................................................44 

Setting the Audio Control................................................................................................................................................44 

Setting the Subtitle Language and Display...............................................................................................................45 

Setting the Factory Default..............................................................................................................................................45 

Viewing the System Information...................................................................................................................................46 

Viewing the Signal Detection..........................................................................................................................................46 

Viewing the Information..................................................................................................................................................47 

Viewing the Channel List..................................................................................................................................................48 

Displaying and Switching Channel List.......................................................................................................................48 

Setting the Closed Captions............................................................................................................................................48 

Displaying the Teletext .....................................................................................................................................................49 

EPG(Electronic Program Guide)......................................................................................................................................49 

■ Watching ............................................................................................................................................................50 

Watch Current Television Program................................................................................................................................50 

Selecting the Analog Input/ Selecting the DTV Input............................................................................................50 

Set Volume / Change Channel........................................................................................................................................50 

Recall a Favourite Input/ Select Source ......................................................................................................................51 

Watch Two Programs at the Same Time (PIP) ...........................................................................................................52 

Set Picture-in-Picture Position/ Teletext/ Still Picture /Set Sleep Time.............................................................53 

Set Picture Mode while Watching..................................................................................................................................54 

Adjusting Picture Size while Watching........................................................................................................................54 

Set Sound while Watching...............................................................................................................................................54 

Set Stereo/ Mono while Watching.................................................................................................................................54 

■ Cleaning and Troubleshooting....................................................................................................................55 

Cleaning / Troubleshooting.............................................................................................................................................55 

2

Conformity 

Conformity 

This product is subject to the European guideline 2002/96/EC. 

All electric and electronic devices must be disposed of separately from 

household waste at publicly established facilities. 


Avoid hazard to the environment and dangers to your personal health by 

disposing the device properly. 

For further information about the proper disposal, contact the relevant 

local government department, the disposal facility or the shop where 

you bought the device. 

3

Unpacking and Setup 

Unpacking and setup 

Scope of Supply 

Please check, that the delivery is complete. 

1. Unit 

2. Remote control 

3. Batteries 

4. Mains cable 

Safety 

• Read the following instructions carefully. 

• Keep this manual at hand. 

• Closely follow the instructions given. 

• Proceed exactly as described in the instructions. 

• Do not use the unit near water. 

• Clean the unit with a dry cloth only. 

• Ensure that the ventilation openings are not covered. 

• Do not install the unit close to heat sources such as radiators, stoves or other devices (including 

amplifiers) radiating heat. 

• Use grounded plugs (shock-proof plugs) and wall outlets only. If the provided plug does not fit your 

outlet, consult an electrician to replace the outdated outlet. 

• Lay the power cable in a manner that does not obstruct anyone. Make sure the power cable is not 

damaged or stepped on, particularly at the plug and at the exit of the unit. 

• In case you have to disconnect the unit quickly from the mains, make sure the wall socket is easily accessible. 

Connect the unit as described in the instructions by the manufacturer. 

• To completely disconnect the unit from the electric power, unplug the power cable. 

• Do not use any extension cables. 

• Use the accessories specified by the manufacturer only. 

• Only use suitable stands, supports, carts or tables that ensure the unit does not tip over. If you place 

the unit on a cart, move it with caution to prevent injuries or damage resulting from tip-over. 

4


 

• Unplug the unit during lightning storms or if you will not use it for a longer period of time. 

• Refer all servicing to qualified service personnel only. Servicing is required if the unit has been 

damaged, e.g. if the power cable or power plug are damaged, if liquid or objects entered the unit, 

it it was subject to rain or any other kind of humidity, if it has been dropped or if it does not operate 

properly. 

• Safety instructions to handle the battery - to prevent leakage of the batteries and related health 

hazards or damage to material follow the instructions below: 

- Mind the polarity of the batteries (+/-) when inserting. Use only similar batteries (manufacturer, 

carbon, alkaline, old, new) together. 

- Remove the batteries, if you will not use the unit for a longer period. 

• To avoid electric shock or fire, do not expose the unit to rain or humidity. 

• Do not expose the unit to dripping or splashing water. Do not place any container with liquids 

(beverages, vases etc.) on the unit. 

• Do not place any open fire (candles etc.) on the unit. 

• If you use an outdoor antenna, make sure to ground the antenna to provide protection against 

voltage surges and build up of static charges. 

• Please make sure to observe the local laws and regulations applicable in your country. 


This symbol indicates instructions to facilitate the operation. 

This symbol indicates additional safety instructions in the text. 

5


Location 

The Best Distance 

The distance when watching programs on a television of this size should be 

approximately 3 to 5 metres. If the distance is too large or too small, this may 

lead to strain of your eyes. This may impair your health. 

Background Light/Reflections 

When watching television at night, the television should not be the only source of light in the room. The big 

difference of brightness between the screen and the background causes continuous dark-light 

adaptation of the eyes. This leads to strain of the eyes and may cause headaches. It is better, if a 

dim, indirect light lights-up the environment of the television. For the same reasons, make sure that no 

reflections on the screen impair the picture. 

The Best Alignment 

Choose a location that allows you to sit in a relaxed position. Otherwise, tension 

and further impairments to your health may be the consequence. 

Additional Information on the Location 

• Do not expose the unit to direct sunlight. 

• Avoid humid and/or dusty environments. 

• Place the unit on level, non-vibrating surfaces. 

• Do not place the unit close to the outlets of air conditioners or heaters. 

• Make sure the unit is easily accessible from all sides. 

• Make sure that no liquids can enter the unit. 

• Avoid extreme changes of temperature to prevent humidity condensing in the unit. 

Intended purpose 

This is a unit for consumer electronics. It may only be used for private, non-industrial purposes. The 

unit is constructed to be used a maximum of 6 hours per day. 

Furthermore the unit may only be operated indoors and not for commercial purposes. 

Keep this user guide carefully. 

6

Viewing the Control Panels 

Viewing the Control Panels ( 55" ) 

Front View 


INPUT 

1 Input source selection button 

2 MENU selection button 

3 Volume adjustment button 

4 Channel selection button 

5 Power button 

6 Remote control sensor 

7 Power Indicator 

Rear View 

CI Slot Antenna Power Switch/ Power Inlet 

1 HDMI Input (HDMI 1, 2, 3, 4) 

2 Video Output (AV Out) 

3 Audio L/R (AV Out) 

4 Digital Audio Out (Coaxial) 

5 Digital Audio Out (Optical) 

6 Video Input (AV Input) 

7 Audio L/R (AV Input) 

8 Headphone Jack 

9 Service Port 

10 Audio Input (PC) 

11 Analog RGB Input (PC) 

12 DTV/Component 

Video (Y/Pb/Pr) Input 

13 Audio Input (COMPONENT) 

14 Control Port (External control only!) 

15 CI Slot 

16 Antenna Input Jack 

17 Power Switch (Main) 

18 Power Inlet 

7

Viewing the Control Panels 

Viewing the Control Panels ( 40"/ 46") 

Front View 

INPUT 

1 Input source selection button 

2 MENU selection button 

3 Volume adjustment button 

4 Channel selection button 

5 Power button 

6 Remote control sensor 

7 Power Indicator 

Rear View 

CI Slot Antenna Power Inlet /Power Switch 

1 HDMI Input (HDMI 1, 2, 3, 4) 

2 Video Output (AV Out) 

3 Audio L/R (AV Out) 

4 Digital Audio Out (Coaxial) 

5 Digital Audio Out (Optical) 

6 Video Input (AV Input) 

8 

7 Audio L/R (AV Input) 

8 Headphone Jack 

9 Service Port 

10 Audio Input (PC) 

11 Analog RGB Input (PC) 

12 DTV/Component 

Video (Y/Pb/Pr) Input 

13 Audio Input (COMPONENT) 

14 Control Port (External control 

only!) 

15 CI Slot 

16 Antenna Input Jack 

17 Power Inlet 

18 Power Switch (Main)

Remote Control 




1. Power Indicator 

2. Numeric buttons 

3. Previous Channel 

4. Program(Channel) 

Selection 

17. PIP Function Display 

- PIP Mode, PIP ON/ OFF 

- PIP Source Selection 

- Swapping Main and Sub 

Picture 

- PIP Position Selection 

18. Power On/ Off button 

5. Control the cursor in the OSD 

Menu 

19. Return to the Previous Menu 

6. Menu button/ Menu 

Confirmation 

7. External Input Source 

Selection 

8. Sound Mode Selection 

9. Information Display 

20. Volume Control (Up/ Down) 

21. Picture Mode Selection 

22. Picture Still 

23. Temporary Sound Mute 

10. PC Control Mode. Press twice 

to switch to VGA-input, and the 

remote-control swichtes function 

to control PC - GREEN diode 

is active. IR-reciever must be 

connected to your PC. 

11. Teletex Function 

12. TV Mode. Press once to 

switch remote and TV back to TVmode. 

RED diode is active. 

13. DTV Setup 

SeTup TV/radio cH.liST epg 

24. Picture Size Selection 

25. Display Current Time 

26. Display Digital Channel list 

stored in TV. 

27. Display Program Guide of 

Digital TV. 

28. Closed Caption On/Off. 

29. Favorite Input Selection. 

14. TV/RADIO Selection 

15. MTS (Mono/ Stereo Dual 

Selection) 

16. Sleep Timer 

9

Connections and Start of Operation 


Connections Roof Top Aerial 

You can connect roof top aerial to the unit. 

Connecting on board Digital Tuner 

Use a coaxial cable to connect the units 

AC 100~240V 

1 Plug the coaxial cable into the socket [ANT] on 

the television set. 

Connecting to the Roof Aerial or Cable Reception 

Ensure that the roof aerial is properly installed and grounded. 

If the roof aerial is not properly grounded, voltage may damage the unit and 

static charges may build up. 

1 Plug the coaxial cable of the roof aerial or cable 

reception into the socket [ANT]. 

Rear of the TV 

ANT 

or 

CATV 

Connecting to Headphones 

The output for the headphone is on the right rear side of the unit. 

10


Connecting to the HDMI Connection 

This can be applied if there is the HDMI Output connector on the external device. 


What is HDMI (High-Definition Multimedia Interface)? 

HDMI is a next generation interface that connects the digital audio and video signals using only 

one cable without compression. The sound signal supports multi-channel (5.1 Channel). So 

it is called a multimedia interface rather than a video terminal. The difference between HDMI 

and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy 

Protection) and supports multi channel audio. 

1 Connecting HDMI Cable 

Connect the HDMI cable from the output jack on 

the DVD player or Set-top box to the [HDMI1], 

[HDMI2], [HDMI3], or [HDMI4] input jack on the 

TV. 

2 Connecting HDMI/DVI Cable 

Connect the HDMI/DVI cable and audio cable 

from the output jacks on the DVD player or Settop 

box to the [HDMI1], [HDMI2], [HDMI3],or 

[HDMI4] input jack and PC and PC audio input 

jacks on the TV. 

Connecting to External Devices with Component Input 

You can use the television set to connect DVD recorder/player and set-top-box. Connect the 

audio and video cables from the external equipment's output jacks to the TV input jacks, as 

shown in the figure. When connecting the TV to external equipment, match the jack colors. 

1 Plug the video cable according into the colours 

to the output sockets of the external devices. 

2 Plug the other end of the video cable according 

to the colours into the Y, Pb, Pr sockets 

[COMPONENT] on the television set. 

3 Plug the audio cable according to the colours to 

the audio output sockets of the external devices. 

4 Plug the other of the audio cable according to 

the colours into the audio input socket on the 

television set. 

If the external equipment has mono audio output, connect it only to left socket 

of the audio input/output. 

11


Connecting Camcorders and Video Games 

You can use the television set to connect camcorder and video games. 

Connecting Camcorders and Video Games by AV Cable 

1 Connect the AV cables according to the colours (red/white/yellow) to the sockets [VIDEO/AUDIO IN] 

and the output sockets of the external devices. 

Connecting to the AV Out Connection 

You can record the video and audio signal by a second device as a VCR from the AV Out jack 

of the TV If the main input is selected to ATV, Composite Video or S-Video, the signal is output 

to composite Video format. But, if it is selected to DTV, HDMI and Component, the signal is not 

output to composite video port. 

1 Connect the AV cables according to the colours (red/white/yellow) to the sockets [VIDEO/AUDIO Out] 

and the output sockets of the external devices 

12


 

Connecting to a Computer 

You can use the television set as a monitor for the computer. This is possible parallel to 

television operation. Use a 5-pin D-Sub cable or a DVI-D cable to connect the television set to 

the computer. 

1 Plug the cable into the output socket of the 

graphic board. 

2 Plug the other end of the cable into the 

socket [RGB]. 

3 Connect the audio cable according to the 

colours to the socket [PC Sound] on the 

television set and the output sockets of the 

graphic board. 


Adjust the settings of the television picture 

corresponding to the settings for television 

operation. See “Settings” on Page 17. 

If the television set does not receive any signal, adjust the output of the computer. For 

information on how to setup the computer, refer to the corresponding manual of the 

computer 

Connecting the Digital Audio Output 

You can Connect optical digital audio cable to "DIGITALAUDIO OUT" on the rear of the TV 

and the other end to "DIGITALAUDIO IN" of the equipment with a digital output to enjoy digital 

sound (Multi-Channel Surround Sound, Stereo, Dolby Sound). 

1 Connect the [OPTICAL] port of the DIGITAL 

AUDIO OUT on the rear of the TV to the 

optical audio input of the DVD Home Theater 

System (or AV Receiver Amplifier) using the 

optical cable. 

2 Connecting the COAXICAL Port Connect the 

[COAXIAL] port of the DIGITAL AUDIO OUT 

on the rear of the TV to the coaxial audio 

input of the DVD Home Theater System(or 

AV Receiver Amplifier)using the coaxial 

cable. 

Refer to corresponding user's 

manual from the manufacturer 

for connecting the speaker 

to the DVD Home Theater 

System or AV Receiver 

Amplifier. 

SPDIF OUT (OPTICAL/COAXIAL) 

may have the signal compatibility 

problems with certain A/V receiver 

and this is known issues. Due to the 

problems, it may have difficulty in 

output sound 

13


Connecting Several Devices 

You can use the connections described parallel . On how to select the desired source see 

“Select Source” on Page 51 and “Select Signal Source for PIP” on Page 52. 

Control Port Connection (Expert Control Only) 

Note : This connector is not an Ethernet connection. Do not connect this port to an Ethernet connection, 

damage can occur to the TV and Ethernet port. 

Female RJ45 : 

1.IR IN with carrier 

2.RS-232 TXD (From TV) 

3.RS-232 RXD (To TV) 

4.IR IN no carrier 

5.GND 

6.IR OUT no carrier 

7.IR OUT with carrier 

8.+5VDC @100mA out (From TV) 

14


Inserting the CI Slot 

To watch paid channels, the CI CARD must be inserted. 

- When not inserting CI CARD in some channels, Scrambled Signal is displayed on the 

screen. 

- CI CARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an 

error message is displayed, please contact your service provider. 


1 Insert the CI CARD in the direction marked on slot. 

CI CARD 

Note : 

- You must obtain a CI CARD from a local service provider. 

- If you have any problems, please contact a service 

provider. 

Connecting Mains Cable 

1 Connect the mains cable. 

15


Inserting the Batteries 

For the operation of the remote control 2 type R03 1.5V Size AAA batteries are included in the 

delivery. 

When inserting the batteries, ensure the polarity is matched correctly (+ and - 

marking on the battery and on the unit). 

1 Remove the cover on the back of the 

remote control and insert the batteries. 

Notes on Handling Batteries 

When used properly batteries are a safe and reliable source of energy. However, when misused or not used 

according to the intention, they may leak. In extreme cases there is a danger of explosion or fire. Therefore 

please understand that the manufacturer will not be liable in case of misuse or improper use. For detailed 

information on how to handle the batteries, please contact the battery-manufacturer. 

Never try to recharge non-rechargeable batteries. 

Disposal of batteries is clearly regulated by legal acts. Consumer quantities of batteries 

must be taken back by the dealer or by local public collectors. Never discharge 

batteries together with common waste. Make use of the free public collection system! 

Protect your environment. Return used batteries. 

16

Settings 

 

 

 

Settings 


Switching On 

1 Press the mains switch on the back of the unit. 

2 Press on the remote control. This switches the unit on and it can be operated using the remote 

control. 

If it is not explicitly stated otherwise, it will be assumed that the unit and the TV set 

are switched on and will be operated by the remote control. 

By default, the unit is set to the English language. For information on how to change the 

on-screen language later, refer to: “Set Screen Language” on page 23. 

Switching Off 

Stand by 

1 Press on the remote control 

Please note that the unit also consumes a little power when in stand by mode. 

Switch Stand by Off 

1 Press the mains switch on the back of the unit. 

Now the unit is switched off completely and does not consume any power. 

Setting up for Operation 

You can adjust various settings of the unit to adapt it to your requirements. 

17

Settings 

Open, Select and Close Menus 

The settings of the unit are accessible via menus. To navigate in the menus proceed as follows: 

Picture Audio Timer Analog Setup Option 

MPEG Picture NR Audio10 

Timer Analog Setup Option 


1 Press . 

The main menu opens. The submenu selected 

last will be displayed. 

2 If necessary, press to return to the main menu. 

3 Press ◄ or ► to select the desired menu Or 

4 Press ▲ or ▼ to select the desired sub menu. 

5 Press ◄ or ► to set the desired sub menu. 

6 Press to move one menu level up. 

7 Press ▲ or ▼ to select the desired setting. 

8 Press to activate the desired setting. 

9 Press to save the settings. 

Tuning (Analogue TV) 

Starting Automatic Tuning TV Stations 

Use this feature to start automatic tuning. The TV channels will be tuned and stored. Later you can 

rearrange the sorting of the TV channels as you wish. 

You only need to tune the TV channels, if the device is connected to a roof aerial. 

If you use a satellite receiver, a decoder or a similar device, the signal of this device 

will be shown. Press and select the desired device. 




1 Press . To return to the main menu, press 

several times. 

2 Press ◄ or ►, and select Analog. 

3 Press ▲ or ▼, and select AUTO TUNING. 

4 Press . 

5 Select the country where you want to operate the 

unit, usinp the ▲ or▼ buttons. 

6 Press or ▼ to select the desired setting. 

7 Press the ▲ or▼buttons to select start. 

8 Press to start tuning. 

Press to interrupt tuning. 

The tuning starts and the TV channels are listed. 

9 After tuning is completed a menu in which you 

can make the settings opens. 

You can also make the settings later. Note that TV must be selected as a signal 

source for this menu to be active. 

18

Settings 

 

Change Program 

Use this function to set the channel for individual stations. 






2 Press ◄ or ► and select Analog. 

3 Press ▲ or ▼ and select MANUAL TUNING. 

4 Press . 

5 Press ◄ or ► and select the desired program NO. 

6 Adjust the settings in the other menus. 


8 Press . 


Set Color System 

Use this function to set the television signal to your national television standard. 

These settings are made automatically by the automatic tuning function. 

You should only change the settings described in this section, if you are familiar 

with the reception of television signals. 








4 Press . 

5 Press ▲ or ▼ and select Color. 

6 Press . 



9 Press . 

The following settings are available: 

PAL, SECAM, NTSC 

19

Settings 

Set System 

Use this function to set the sound signal to your national television 

standard. 



Picture Audio Timer Analog Setup Option 2 Press ◄ or ► and select Analog. 


4 Press . 

5 Press ▲ or ▼ and select SYSTEM. 

Picture Audio Timer Analog Setup Option 6 Press . 



9 Press . 


The following settings are available:BG, DK, I, L, L’, M 

Change channel 

These settings are made automatically by the automatic tuning function. 

You should only change the settings described in this section, if you are familiar 

with the reception of television signals. 

Use this function to set the channel for individual stations. 



Picture Audio Timer Analog Setup Option 2 Press ◄ or ► and select Analog. 


4 Press . 

5 Press ▲ or ▼ and select CHANNEL. 


6 Press ◄ or ► and select the desired channel. 

7 Adjust the settings in the other menus. 


9 Press . 


Fine Tuning 

Use this function to adjust the tuning of the individual channels for a clearer picture. 








4 Press . 



7 Press ▲ or ▼ and select FINE TUNING. 

8 Press ◄ or ► and adjust the fine tuning. 


10Press . 

20

Settings 

Change Channel Name 

The names of the channels are programmed into the receiver. You can change these names 

manually. 









4 Press . 



7 Press ▲ or ▼ and select NAME. 

8 Press . 

9 Press ▲ or ▼ to select the desired letter. 

10Press . 

11Press ◄ or ► to move to the next letter. 

12Press to save the settings. 

Sound Setting 

The unit can record and play back stereo sounds. 







4 Press . 

5 Press ▲ or ▼ and select SOUND. 

6 Press . 



9 Press . 


This setting is only available if the tuner is receiving a signal from the roof aerial 

or the cable. If you have connected an external device, set the language on this 

device. 


Stereo/Dual 1: National language stereo 

Mono/Dual 1: National language mono 

Stereo/Dual 2: Foreign language of the program 

Stereo/Dual 12: Both languages at the same time 

21

Settings 

Improve Signal Quality 

Use this function to improve poor signal quality. 







4 Press . 

5 Press ▲ or ▼ and select WEAK SIGNAL BOOST. 

6 Press . 



9 Press . 


The following settings are available: On/Off 

Set Channel 

Use this function to set the settings for individual channels. 






3 Press ▲ or ▼ and select PROGRAMME EDIT. 

4 Adjust the settings. 


7 Press . 



Lock: Lock channel 

Delete: Delete a channel. 

Skip: Skip channels when scrolling 

Insert: Insert a channel. 

Move: Move a channel up or down in the list of channels. 

22

Settings 

Reduce Noise 

Use this function to reduce picture noise. 






2 Press . 

3 Press ▲ or ▼ and select NOISE REDUCTION. 

4 Press . 

5 Press ◄ or ► to select the desired setting. 


7 Press . 





Set Screen Language 

By default, the unit is set to the English language. The screen display text can be displayed in 

several languages. 



english 

on 

full 




2 Press ◄ or ► and select SETUP. 

3 Press ▲ or ▼ and select OSD LANGUAGE. 

4 Press . 



7 To return to the main menu, press several 

times. 

23

Settings 

Set Aspect Ratio 



english 

on 

full 





3 Press ▲ or ▼ and select ASPECT RATIO. 

4 Press . 



7 Press . 


Normal: The format 16:9 is suppressed. The format 4:3 is not adapted a black area is displayed on the left and the right. 

Full: The format 16:9 is displayed as broadcast. The format 4:3 is horizontally spread. 

Zoom: Like zoom1 but the whole picture is moved upwards so that text at the bottom of the display becomes visible. 

Panorama: The format 16:9 is displayed as broadcast. The format 4:3 is horizontally spread. In this the 

outer areas of the picture are modified more than the centre of the picture. 

1:1: The format is 1:1 real size. 

Favourite Inputs 

Use this function to store inputs in the list of favourites with access . 

Analog 

english 

on 

full 




3 Press ▲ or ▼ and select Favorite Inputs. 

4 Press . 

5 Press ▲ or ▼ to select the desired line. 

6 Press ◄ or ► to select the desired channel or 

input. 

Watch Favourite Input 

Press 

to scroll through your Favourite Inputs. 

24

Settings 

Set Picture Mode 

Use this function to adapt the picture optimally to the content. You can also adapt the sound modes for 

these settings. See “Adjust Individual Audio Frequencies” on page 28. 






2 Press ◄ or ► and select PICTURE. 

3 Press ▲ or ▼ and select PRESET SETTING 

4 Press . 



7 Press . 



Standard: Factory setting value. 

Sport: Setting for a clearer picture. 

Night: Setting for a dark background of the television set. 

Day: Setting for a bright background of the television set. 

Custom: Select this mode if you want to adjust the settings individually. 

See “Additional Picture Settings” on page 25. 

Additional Picture Settings 

Use this functions to adjust the picture settings individually, if you have selected the picture mode Custom. 






3 Press ▲ or ▼ to select the desired menu. 

4 Press to open the desired menu. 


6 Press to save the settings. The settings will 

be saved in the picture mode CUSTOM. 

7 Press . 



Back Light: Adjust the black level for the contrast of picture. 

The dark regions of the picture are made darker, while bright area remains unchanged. 

Brightness: Brightness of the picture 

Contrast: Contrast of the picture 

Sharpness: Sharpens the edges of the objects 

Color: Adjusts the intensity of the colors 

Tint: Sets the hue 

25

Settings 

Set Individual Color Channels 

Use this function to adjust the intensity of the individual color channels. 






3 Press ▲ or ▼ and select Color TEMP. 

4 Press . 



7 Press . 



Standard/ 6500K/ 8500K/ 9300K/ Custom 

Set Auto Backlight Control 






3 Press ▲ or ▼ and select AUTO BACKLIGHT. 

4 Press . 



7 Press . 



26

Settings 

Audio Settings 

Set Balance 




0 

40 

Picture 

Surround 

line out 

ScrAudio een of f Timer Analog Setup Option 



2 Press ◄ or ► and select AUDIO. 

3 Press ▲ or ▼ and select BALANCE. 

4 Press . 



7 Press . 

Set Audio Delay 



0 

40 

Picture 

Surround 

line out 

Scr een of f 

Audio Timer Analog Setup Option 




3 Press ▲ or ▼ and select AUDIO DELAY. 

4 Press . 



7 Press . 

27

Settings 

Adjust Individual Audio Frequencies 

Use this function to adjust the individual frequency ranges. The settings are allocated to the 

different Picture picture Audio modes. Timer Analog Setup Option 


0 

40 

Picture 

Surround 

line out 

Scr Audio een of f Timer Analog Setup Option 




3 Press ▲ or ▼ and select EQUALIZER. 

4 Press . 

5 Press ◄ or ► to select the desired frequency. 



8 Press . 

Adjust Medium and Low Frequencies 

Use this function to boots the medium and low frequencies to create a better surround sound. 



0 

40 

Picture 

Surround 

line out 

ScrAudio een of f Timer Analog Setup Option 




3 Press ▲ or ▼ and select SURROUND. 

4 Press . 




On/Off 

Set the Audio Input (HDMI or PC) 



0 

40 

Picture 

Surround 

line out 

Scr Audio een of f Timer Analog Setup Option 




3 Press ▲ or ▼ and select HDMI AUDIO. 

4 Press . 



7 Press . 


HDMI/ PC 

When connecting the PC to your TV with the 

HDMI/DVI cable, you should select PC. 

28

Settings 

Set Sound Source 


Use this function to set which sound you will hear when watching picture-in-picture mode. 


Surround 

0 

40 

line out 

Picture ScrAudio een of f Timer Analog Setup Option 




3 Press ▲ or ▼ and select AUDIO SOURCE. 

4 Press . 



7 Press . 



Main: You will hear the sound of the main screen. 

Sub: You will hear the sound of the PIP screen. 







29

Settings 

Set TV Speaker 


Use this function to turn the sound on or off. 


Surround 





3 Press ▲ or ▼ and select SPEAKER. 

4 Press . 



7 Press . 


Note. 

If you connect the Optical or Coaxial Audio 

Outputs from the television to the input of a 

Multi-Channel Digital Audio System, you must 

set the televisions onboard speakers to “OFF” 

to enable 5.1 channel Surround Sound output. 

In this situation, when the “Stereo” button is 

pressed on the television remote control and 

the broadcast is available in Multi Channel 

Surround Sound a box will appear on the 

screen giving two options. Surround Sound is 

selected when the bar showing the surround 

logos (on the left and right) is selected. 

30

Settings 


Set Time 

In order to set the correct times for switching on and off automatically, the clock in the 

receiver must be set correctly. 







2 Press ◄ or ► and select TIMER. 

3 Press ▲ or ▼ and select 12HR/24HR. 

4 Press . 

5 Press ▲ or ▼ to select the desired settings. 

6 Press . 

7 Press to return to the previous menu. 

8 Press ▲ or ▼ and select CLOCK. 

9 Press ►. 

10 Press ▲ or ▼ and select AM for times between 

0:00 hours and 12:00 hours or PM for the times 

between 12:00 hours and 24:00 hours. 


12 Press . 

Set Switch on Time 

Use this function to set a time when the unit turns on. 




Set Switch off Time 


Use this function to set a time when the unit turns off. 

1 Press .To return to the main menu, press 



3 Press ▲ or ▼ and select ON TIMER. 

4 Press . 

5 Press ◄ or ► and select ON or OFF. 




7 Select the channel. 

8 Set the volume. 

9 Set the Auto Power off time using the▲ or ▼. 


11 Press . 





3 Press ▲ or ▼ and select OFF TIMER. 

4 Press . 

5 Press ◄ or ► and select ON or OFF. 





8 Press . 

31

Settings 


Set Sleep Time 

Use this function to automatically turn off after a preset interval. (off to 180 min) 






3 Press ▲ or ▼ and select SLEEP TIMER. 

4 Press . 

5 Press ◄ or ► and select desired setting. 


7 Press . 


Off / 10min / 30min / 60min 120min / 180min 

Automatic Switch off 


Automatic Switch off if no Signal is Received 

This function switches the unit automatically off, if no signal is received. (E.g. when a video tape was 

played Picturecompletely Audio and Timer the video Analog recorder Setupturns Option off). 




2 Press ◄ or ► and select OPTION. 

3 Press ▲ or ▼ and select NO SIGNAL POWER 

OFF. 

4 Press . 

5 Press ▲ or ▼ and select the time. 


7 Press . 


Switch Off if no Key is Pressed 

This function switches the unit automatically off, if no key is pressed for a longer time. 






3 Press ▲ or ▼ and select NO OPERATION 

POWER OFF. 

4 Press . 

5 Press ▲ or ▼ and select the time. 


7 Press . 

32

Settings 


Reduce Energy 

Use this function to reduce the energy, if no key is pressed for a period of time. 







3 Press ▲ or ▼ and select ENERGY SAVING. 

4 Press . 

5 Press ▲ or ▼ and select desired setting. 


7 Press . 


On/ Off / Auto 

Set On-Screen Display 


Set Duration 

Use this function to set the time span for which the on-screen display will be shown. 


Analog 





3 Press ▲ or ▼ and select OSD SETTING. 

4 Press . 

5 Press ▲ or ▼ and select OSD TIMEOUT. 



8 Press . 


Off / 10sec / 20sec / 30sec / 60sec 

33

Settings 


Set Transparency 

Use this function to set the transparency of the on-screen display. 



1 Press . To return to the main menu,press 



3 Press ▲ or ▼ and select OSD SETTING. 

4 Press . 

5 Press ▲ or ▼ and select OSD TRANSPARENCY. 



8 Press . 


0% / 10% / 20 % / 30 % / 40% 

Child Lock 

You Picture can lock Audiothe keys Timeron Analog the front Setup panel of Option the unit. Then the operation is only possible by 

the remote control. In this case keep the remote control out of the reach of children. 

Activate Child Lock 






3 Press ▲ or ▼ and select LOCAL LOCK. 

4 Press . 



7 Press . 

If a deactivated key is pressed the message 

“LOCAL LOCK” will appear. 


Off: No key lock. 

Once: The key lock is active until the unit is turned on or off using the remote control. 

Always: The key lock is permanently active. 

34

Settings 

Deactivate Child Lock 

To deactivate child lock, proceed as described in chapter “Activate Child Lock” on page 34 and select OFF. 


Set Characters for Teletext 

Use Picture this function Audio Timer to set the Analog character Setupset for Option teletext to your region. 






3 Press ▲ or ▼ and select TELETEXT GROUP. 

4 Press . 

5 Press ▲ or ▼ and select the character set. 


7 Press . 


West, East, Cyrillic, Arabic, Farsi 


Removing the Judder 

Removes drag from fast scenes with a lot of movement to provide a clearer picture. 






3 Press ▲ or ▼ and select JUDDER. 

4 Press . 

5 Press ◄ or ► to set JUDDER LEVEL. 

6 Press ▲ or ▼ to select desired mode. 

7 Press ◄ or ► to select desired setting. 


9 Press . 

Judder Level: When you are viewing the fast scenes with a lot of movement, sets judder level to remove 

the picture drag or afterimage 


-Off: Switches Judder level off. 

-Low: Sets Judder level to minimum. 

-Standard: Sets Judder level to medium. 

-High: Sets Judder level to maximum. 

-Demo: Displays the difference between Judder on and off modes. 

PC Mode: When using this unit to PC monitor, removes drag from fast motion pictures. 

24p Cinema: Removes drag of motion pictures when using cinema source, . 

Game mode: When playing games with connecting the game device, removes drag of motion pictures. 

35

Settings 


Set Miscellaneous 

Set RGB Input (Video or PC) 






3 Press ▲ or ▼ and select MISCELLANEOUS. 

4 Press . 

5 Press ▲ or ▼ to select RGB INPUT. 



8 Press . 

Set Video Resolution (1280/1360) 

1 Repeat steps from 1 to 4 in chapter “Set MISCELLANEOUS” 

2 Press ▲ or ▼ to select RGB 1280/1360. 


4 Press to select desired setting. 

5 Press . 

Set HDMI1, HDMI2, HDMI3 or HDMI4 Input 

1 Repeat steps from 1 to 4 in chapter “Set MISCELLANEOUS” 

2 Press ▲ or ▼ to select HDMI1 INPUT, HDMI2 INPUT, HDMI3 INPUT or HDMI4 INPUT. 


4 Press to select desired setting. 

5 Press . 

When connecting the PC to your TV with the HDMI/DVI cable, you should select PC. 

Set Geometry 

Use this function to adjust screen status. 







3 Press ▲ or ▼ and select GEOMETRY. 

4 Press . 

5 Press ▲ or ▼ and select the desired menu. 

If you want to reset to the factory default settings, 

select “Reset” and press . 

6 Press ◄ or ► to adjust desired settings. 


8 Press . 

36

DTV Setting 

Settings for the Computer 

If you are using the unit as a monitor for your computer, make the applicable settings accordingly. 

Set the resolution to 1920 X 1080 and the frequency to 60 Hz. 


Setting up Digital Television Tuner 

Television is not pre tuned and "No Signal" will appear on screen until antenna is connected 

to DTV aerial input and Digital Tuner is setup. Please follow the simple setup instructions 

below. 

Selecting the Digital Television Input 

Main Input 

1. TV 

2. AV 

3. Component1 

4. RGB 

5. HDMI1 

6. HDMI2 

7. HDMI3 

8. HDMI4 

9. DTV 

1 Press the Input List button. 

A menu of all available input sources are 

displayed. 

TV - AV - Component1 - RGB - HDMI1 - HDMI2 - 

HDMI3 - HDMI4 - DTV 

2 Press the ▲ or ▼ button to select DTV and 

press the button. 

3 To return to the previous menu, press the 

button. 




Preference 

Time Setting 

Time Setting 

Time Setting 

Setting up DTV 

1 Press the button. To return to the main menu, 

press the button several times. 

2 Press the ◄ or ► button to select DIGITAL and 

press . 

3 Press the ▲ or ▼ button to select DTV Setup 

and press the . Digital Setup menu will 

appear. 

37

DTV Setting 

Setting the Area 

You can set the current area for watching DTV. 

Area Setting 

Country 

EXIT Exit 

p 

Select or set the o 

tion 

Australia 

Austria Turkey 

Ukroine Croatia 

United Czech Kingdom Republic 

Denmark Australia 

Other Country Estonia 

1 To select the desired DTV function, follow the 

“Setting up DTV” instructions number 1 to 3. 

2 Press the ▲ or ▼ button to select Installation and 

press . 

3 Press the ▲ or ▼ button to select Area Setting and 

press the . 

4 Press the to select Country. 

5 Press the ▲ or ▼ button to select desired area. 


7 Press . 

Note: If the country has changed, all channels that you 

set previously are deleted. 

DTV Searching 

Starting Automatic Searching DTV Stations 

Use this feature to start automatic searching. The TV channels will be tuned and stored. Later you can 

rearrange the sorting of the DTV channels as you wish. 

Installation 

Edit Channel Lists 

Edit Favourite Channels 

Area Setting 

Automatic Search 

Manual Search 

Antenna PowerO 

Off 




press . 

3 Press the ▲ or ▼ button to select Automatic 

Search. 

4 Press the to start searching. 

Move to the selected submenu 

Note: It may take a few minutes for the receiver 

searches their channels. 

Search Result 

TV : 7ch 

Radio : 0 ch 

7 Digital 

7 HD Digital 

7 Digital 1 

7 Digital 2 

7 Digital 3 

7 Guide 

CH 28 (522500 KHz) 6/200 ch 

Finish 

Save 

- During the channel searching, the cursor is located 

at Stop on the screen. Therefore, if you press the 

Blue button during the channel searching, the 

searching is stopped and the channels found until 

then will be displayed. 

- If searching is successfully completed, but the 

channel does not exist, press the button and try 

to reset the searching again if necessary. 

- When completing channel search, select Save to 

save the changes. 

38

DTV Setting 


You can search channels manually by searching parameters, if you know the Channel 

Frequency information. 


Searching by Channel Number or Frequency 

If you select a channel number, the frequency will be automatically changed and displayed on 

frequency item. 

If you enter frequency, the channel number will be automatically changed and displayed on channel 

item. 


Channel 

Frequency 

EXIT Exit 

Strength(90%) 

Quaiity(82%) 

Select or set the option 


Channel 

Frequency 

4 7 4 0 0 

EXIT Exit 

Strength(64%) 

Quaiity(74%) 


Search 

21 

21 

22 

23 

24 

25 

21 

47400 

1 To select the desired DTV function, follow the “Setting 

up DTV” instructions number 1 to 3. 


press . 

3 Press the ▲ or ▼ button to select Manual Search 

and press . 

4 To search by Channel, press the and then select 

the channel number using the ▲ or ▼ button. 

5 To search by Frequency, press the ▼ button to select 

the Frequency then and type the frequency 

number using the numeric keys. 

6 Strength and Quality level about the Frequency is 

displayed. 

7 Press the ▼ button to select Search and Press 

the to start searching. 

8 After channel searching, this following menu is 

displayed. 

9 Save the listed channels using the Blue button. 

10If you need additional searching channel, repeat 

steps from 4 to 9 in this chapter. 

11Press to return to the previous menu. 

Search Result 

TV : 7ch 

7 Digital 

7 HD Digital 

7 Digital 1 

7 Digital 2 

7 Digital 3 

7 Guide 

Radio : 0 ch 

Finish 

CH 28 (522500 KHz) 

6/200 ch 

Save 

39

DTV Setting 


You can set and edit one or all channels by editing the channel list. 


TV 

0100 7 Digital 

0101 7 HD Digital 

0102 7 Digital 1 



0105 7 Guide 

0002 ABC TV Melbourne 

0020A BC HDTV 

0021A BC2 

0022 ABC TV 

Delete Lock Select All 

Select or unselect the channel 


TV 





Password 


0105 7 .. Guide .. 

0002 ABC TV Melbourne 

0020 

OK 

ABC HDTV 

Cancel 

0021 ABC2 

0022 ABC TV 




press . 

3 Press the ▲ or ▼ button to select Edit Channel 

Lists and press . 

4 Press the ▲ or ▼ button to select desired channel 

and then press the . 

5 Press the desired color button to edit channel. 

6 Press the button to save the changes and Press 

the button to return to the previous menu. 

7 Press . 


Delete (RED button):Delete one or more channels. 

Lock (Yellow button):Lock a channel so that the channel 

cannot be selected and viewed. 

Select All (Blue button): Select all the channels or 

deselect all the selected channels in the channel list. 

Delete Lock Select All 



You can set the selected channels to desired Favourite channel group. 

Installation 



Area Setting Favourite Group 

Automatic Favourite Search 1 

Favourite 2 

Manual Favourite Search 3 

Antenna Favourite PowerO 4 

Favourite 5 

Off 


Edit Favorite Channels 

TV Favorite 1 

0103 7 HD Digital 2 

0104 7 HD Digital 3 

0105 7 Guide 

0002 ABC TV Melbou... 

0020 ABC HDTV 

0021 ABC2 

0022 ABC TV 



0071 7 Digital1 



0102 7 Digital1 

Add 

A~Z 





press . 

3 Press the ▲ or ▼ button to select Edit Favourite 

Channels and press . 

4 Press the ▲ or ▼ button to select Favourite Group 

and then pressthe . 

5 Press the ▲ or ▼ button to select desired Favourite 

channel and then press the . 

6 Press the desired color button to edit channel. 

7 Press the button to save the changes and return to 

the previous menu. 

8 Press . 


Add/ Delete (RED button): Add or Delete one or more 

channels to Favourite group. 

Move (Green button):Move to desired location one or 

more in the list of channels. 

Sort (Yellow button):Change a channel numbers or 

channel names of the stored channels. 

Rename (Blue button):Enter a Favourite group name 

by pressing the keypad displayed on the screen. 

40

DTV Setting 

Setting the Antenna Power 

To use an active antenna, you should set the antenna power to on. 

Installation 



Area Setting 

Automatic Search 


Antenna Power 

On 



“Setting up DTV”instructions number 1 to 3. 


press . 

3 Press the ▲ or ▼ button to select Antenna Power 

and press . 

4 Press the to set On or Off. Whenever you press 

the button the setting toggles On or Off. 

5 Press . 


On: Enables 5V power to active antenna. 

Off: Disables the power. 


Setting up the Parental Control 

This menu allows you to set the age for parental locking and protect children from viewing 

programs unsuitable for their age. 

Setting the Parental Ratings 

Preference 

OSD Control 

Parental Control 

Time Setting 

Password 

.. .. 

OK Cancel 



“Setting upDTV” instructions number 1 to 3. 

2 Press the ▲ or ▼ button to select Parental Control and 

press . The password input menu is displayed. 

3 Enter 4-digit password. The default password 

is ‘0000’ The Censorship Classification menu is 

displayed with current Parental Rating. 

4 Press the . 

5 Press the ▲ or ▼ button to select desired 

restrictions level and press . 

6 Press . 


Censorship Classification 

Change Password 

EXIT Exit 

View All 

View All 

7 

12 

15 

18 


41

DTV Setting 

Changing the Password 




NEW Password 

EXIT Exit 

.. .. 

OK Cancel 




View All 

View All 



2 Press the ▲ or ▼ button to select Parental Control 

and press The password input menu is displayed. 

3 Enter 4-digit password. The default password 

is ‘0000’ The Censorship Classification menu is 

displayed with current Parental Rating. 

4 Press the ▼ button to select Change Password 

and press . The new password input menu is 

displayed. 

5 Press the numeric button (0~9) to enter new 

password and press the . 

6 Press the numeric button (0~9) again to verify the 

new password and press the . 

7 Press . 

Verify Password 

EXIT Exit 

.. .. 

OK 

Cancel 

Setting the Menu Language 

OSD Control 

Menu Language 

Display Time 

EXIT Exit 


OSD Control 

Menu Language 

Display Time 

EXIT Exit 


5 



French 

German 

Portuguese 

Spanish 



2 Press the ▲ or ▼ button to select Preference and 

press the . 

3 Press the ▲ or ▼ button to select OSD Control and 

press . 

4 Press the ▲ or ▼ button to select Menu Language 


5 Press the ▲ or ▼ button to select desired 

Language and then press the . 

6 Press . 

The following languages are available: 

English – French - German- Portuguese –Spanish – 

Swedish - Italian 


42

DTV Setting 

Setting the Menu Display Time 

To use an active antenna, you should set the antenna power to on. 

OSD Control 

Menu Language 

Display Time 

EXIT Exit 


OSD Control 

Menu Language 

Display Time 

EXIT Exit 


5 


5 

5 

6 

7 

8 

9 




press the . 

3 Press the ▲ or ▼ button to select OSD Control and 

press . 

4 Press the ▲ or ▼ button to select Display Time and 

then press the . 

5 Press the ▲ or ▼ button to select desired setting 

value and then press the . Select Disable or 

among the 1~20 seconds. 

6 Press . 



Setting the GMT Offset 

You can set your local time. 

Time Setting 

GMT Offset 

Auto 

Time Zone 

NSW/ACT 

EXIT Exit 

00 : 00 





press the . 

3 Press the ▲ or ▼ button to select Time Setting and 

press . 

4 Press the ▲ or ▼ button to select GMT Offset and 


5 Press the ▲ or ▼ button to select desired setting 

value and then press the . 

6 Press . 

Time Setting 

GMT Offset 

Time Zone 

EXIT Exit 

Auto 

GMT+10:00 

GMT+11:00 

GMT+12:00 

GMT+13:00 

Auto 

00 : 00 


43

DTV Setting 

Selecting the Time Zone 

Time Setting 

GMT Offset 

Time Zone 

EXIT Exit 

00 : 00 


Time Setting 

GMT Offset 

Time Zone 

EXIT Exit 

Auto 

NSW/ACT 

Auto 

NSW/ACT 

NSW/ACT 

SA 

WA 

TAS 

NT 


“Setting upDTV” instructions number 1 to 3. 


press the . 

3 Press the ▲ or ▼ button to select Time Setting and 

press . 

4 Press the ▲ or ▼ button to select Time Zone and 


5 Press the ▲ or button to select desired area and 


6 Press . 

The following time zone settings are available: 

NSW/ACT (New South Wales/ACT) SA (South 

Australia) – WA(Western Australia) - TAS (Tasmania) 

- NT (Northern Territory) – VIC (Victoria) -QLD 

(Queensland) 

00 : 00 


Setting the Audio Control 

You can set audio language. 

A/V Control 

Audio Control 

Subtitle Control 



2 Press the ▲ or ▼ button to select A/V Control and 

press the . 

3 Press the ▲ or ▼ button to select Audio Control 

and press . 

4 Press the ▲ or ▼ button to select desired audio 

language and then press the . 

5 Press . 


Audio Control 

Audio Language 

EXIT Exit 



French 

German 

Italian 

Russian 


44

DTV Setting 

Setting the Subtitle Language and Display 

You can set audio language and display for subtitle. 


Subtitle Language 

Subtitle Display 

EXIT Exit 



Auto 


Subtitle Language 


Subtitle Display Aut Oo 

EXIT Exit 



2 Press the ▲ or ▼ button to select A/V Control and 

press the . 

3 Press the ▲ or ▼ button to select Subtitle Control 

and press . 

4 Press the ▲ or ▼ button to select Subtitle Language 


5 Press the ▲ or ▼ button to select desired Subtitle 


6 Press the button to return to the previous menu. 

7 Press the ▲ or ▼ button to select Subtitle Display 


8 Press the ▲ or ▼ button to select desired Subtitle 


9 Press the to set Auto or Manual. Whenever you 

press the button the setting toggles On or Off. 

10Press . 


OSD Control 

Menu Language 


Note 

Auto: Subtitles are displayed automatically in the 

predefined subtitle language. 

Manual: Subtitles are displayed in the language when 

you select the subtitle language manually. 

Setting the Factory Default 

The status of DTV Mode settings will return to factory default parameters by using this 

function. 

Default Setting 

All setting values will be returned to the initial 

values. doyou want to reset all setting values? 

EXIT Exit 

Auto Yes 

NO 

OSD Control 

Menu Language 



2 Press the ▲ or ▼ button to select System and press 

the . 

3 Press the ▲ or ▼ button to select Default Setting 

and press . 

4 Press the ▲ or ▼ button to select Yes and then 

press the . The password input menu is 

displayed. 

5 Enter 4-digit password. 

When default setting is completed then Installation 

Wizard is automatically displayed. 

45

DTV Setting 

Viewing the System Information 

You can check the current information about your DTV signal such as TV's Hardware, software 

version, System ID, Update Date, and Common Interface. 

Status 

Hardware Version 

REV 1.0 

Software Version NDM-5100T-AU 1.00.00 

System ID 

0x83000500 

Update Date 05 APR 2010 

EXIT Exit 

Slot1 

Empty 




the . 

3 Press the ▲ or ▼ button to select Status and press . 

4 Press . 

Viewing the Signal Detection 

You can check the current signal information such as Strength and Quality of current signal. 

Sighnal Detection 

Strength(0%) 

EXIT Exit 

Quaiity(0%) 




the . 

3 Press the ▲ or ▼ button to select Status and press . 

4 Press . 

46

DTV Setting 

Viewing the Information 

You can check the current program information while watching TV program. 


1 Press the Display button. 

To check the detailed program information, press the Info menu on the displayed information menu. 

2 If the detailed program information is more than one page, press the ▲ or ▼ button to move 

to the previous or next page. 

3 Press the Info button to exit the detailed information. 

47

DTV Setting 

Viewing the Channel List 

This function provides you 3 types of channel lists to quick access for desired channel. 

1 Press the CHLIST( ) button. 

channel list of the current type is displayed. 

2 Press the ◄ or ► button to select desired group. 


TV, TV (Alphabet), Radio, Radio (Alphabet), Favourite 

Note 

Favourite: Favourite channels consist of 5 sub groups depending 

on your desired channel organization. 

Displaying and Switching Channel List 

You can display channel list using the OK button and switch into other channel on the channel 

list. 

1 Press the button while watching a program to display the 

channel list. 

2 Press the ▲ or ▼ button to select desired channel and press 

the button to change the channel. 

Or 

3 Enter directly channel number to move your desired channel 

by pressing the numeric (0~9) button and press the button 

to change the channel. 

Setting the Closed Captions 

1 Press the Captions ( )button while watching a program. 

2 Press the ▲ or ▼ button to select desired caption mode. 

48

DTV Setting 

Displaying the Teletext 

The index page of the Teletext service gives you information on how to use the service. For 

Teletext information to be displayed correct, channel reception must be stable. Otherwise, 

information may be missing or some pages may not be displayed. 


You can change Teletext page by pressing the numeric buttons on the remote control. 

1 Press the TEXT ( ) button. 

2 Press the ▲ or ▼ button to turn pages up or down. 

Press number 100 to 899 to turn the direct number page. 

To move next page in increased number, press the Green button. 

To move previous page in decreased number, press the Red 

button. 

To move next page, press the button. 

To move previous page, press the button. 

To move to the each 7 pages recently viewed in sequence, press 

the ◄ button. 

3 Press the TEXT( ) button again to return normal viewing. 

Teletext Functions 

Index: Display the index (contents) page at any time while you are viewing the Teletext. If there is 

no index page, jump to page 100. 

Reveal: Displays the hidden text (answers to quiz games, for example). To display the normal 

screen, press it again. 

Size: Displays the teletext on the upper half of the screen in double-size. To move the text to lower 

half of the screen, press ▼ button on the remote control. For normal display, press size once again. 

EPG (Electronic Program Guide) 

The Program Guide displays program information about each channel, based on the date 

and time. 

1 Press the EPG ( ) button. 

2 Press the ◄ or ► button to move to previous or next program 

within the current channel or press the ▲ or ▼ button to move 

another desired channel program. Also, you can directly move 

to desired channel by pressing the numeric (0~9) button on the 

remote control. 

3 Select your desired program using the ◄ ►or ▲ ▼button and 

then the . 

4 Press the ◄, or EPG( ) button to exit guide screen. 

To view the detailed information for current selected program, 

press the Display button on the remote control. 

Note 

1 You can check local time, channel name, and other brief information on the current program. 

2 If you didn't set local time under 'Time zone' section, the EPG function may not work properly. 

3 EPG information is delivered by terrestrial signal from service providers. If the channel does not 

carry any signal on the guide data, this function may not work properly. 

49

Watching 

Watching 

Watch Current Television Program 

When you switch the unit on, the current television program will be displayed. 

Selecting the Analog Input 

1 Press . 

You can select TV or AV mode in the main input. 

Selecting the DTV Input 

1 Press . 

Set Volume 

1 Press or to set the desired volume. 

Mute 

1 Press to switch the sound temporarily off. 

2 Press to switch the sound on again. 

Change Channel 

Press or to scroll through the channels. 

Show Channel Information 

Use this function to display the current station name and the channel. 

1 Press . 

2 Press again to hide the information. 

50

Watching 

Recall Favourite Input 

Use this function to scroll through the channels or sources you have stored as your favourite 

stations. This way you do not need to scroll through all the stations, if you only want to watch 

specific subjects. On how to store channels as your favourites see: “Favotite Inputs” on page 24. 


1 Press . 

2 Press repeatedly until you select the desired channel. 

Select Source 

Use this function to select which signal will be displayed on the main screen, if you have 

connected several sources (e.g. a decoder and a roof aerial). 

Main Input 

1. TV 

2. AV 

3. Component1 

4. RGB 

5. HDMI1 

6. HDMI2 

7. HDMI3 

8. HDMI4 

9. DTV 

1 Press . 

Select Input 

Use this function to switch directly between the different input channels. For this, press the keys below. 

HDMI: Selects a RGB or HDMI (HDMI1,HDMI2,HDMI3,HDMI4) input. 

DTV : Selects a DTV input. 

51

Watching 

Watch Two Programs at the Same Time (PIP) 

Use this function to display a second picture. This way you can watch two programs you are 

receiving by antenna or by the other inputs at the same time. You can display on large and 

one small picture or two pictures of the same size. You can adapt the size and the position of 

the small picture. 

Display Second Picture 

1 Press . 

Select Signal Source for PIP 

Use this function to select which signal to display on the sub screen, if you have connected several 

sources. 

1 Press . 

when ever you press you can choose the external signal source excluding the chosen signal source 

on hte main picture. 

PIP TABLE 

PIP 

MAIN TV AV COMPONENT1 RGB HDMI1 HDMI2 HDMI3 HDMI4 DTV 

TV X O O O O O O O X 

AV O X O O O O O O O 

COMPONENT1 O O X O O O O O O 

RGB O O O X X X X X O 

HDMI1 O O O X X X X X O 




DTV X O O O O O O O X 

Switch Second Picture Off 

1 Press several times. 

Display Two Pictures at the same Time (PIP, POP, PBP) 

1 Press several times. 

This function is only available if you have selected a signal source for the main screen and the sub 

screen. 

52

Watching 

Toggle between Two Pictres 

1 Press . 


This function is only available if you have selected a signal source for the main screen and the 

sub screen. 

Set Picture -in-Picture Position 

Use this function to set where the sub screen will be displayed. 

1 Press . 

This function is only available if you have selected a signal source for the main screen and the 

sub screen. 

Teletext 

Use this function to set the size of the small picture. This function is only available if the current station 

broadcasts teletext. 

1 Press to display teletext. 

Teletext is not available for PIP. 

Still Picture 

Use this function to hold the picture. 

1 Press . 

During the display of the still picture the sound will continue to play. 

2 Press again to continue watching. 

Show Time 

Use this function to display the time. If teletext is displayed, the time will not be shown. 

1 Press . 

2 Press or again to hide the time. 

Set Sleep Time 

Use this function to set after how many minutes the unit will switch off. 

1 Press until the desired number of minutes is displayed. 

53

Watching 

Set Picture Mode while Watching 

Use this function to adjust the picture optimally to the content. 

1 Press picture ( ) until the desired mode is displayed.e 

For further information on the settings refer to: “Set Picture Mode” on page 25. 

Adjust Picture Size while Watching 

Use this function to set the picture size. 

1 Press V.Size ( ) until the desired size is displayed.e 

For further information on the setting refer to:"Set Aspect Ratio" on page 24. 

Set Sound while Watching 

Use this function to adjust the sound optimally to the content. 

1. Press Sound ( ) until the desired mode is displayed. 

For further information on the setting refer to:"Adjust Individual Audio Frequencies" on page 28. 

Set Stereo/Mono while Watching 

Use this function to turn the stereo sound on or off. 

1. Press . 

The 

display/ controls the processing and output of the signal. When power is switched on, the mode 

is automatically preset to stereo or dual, depending on the current transmission. 

For further information on the setting refer to:"Sound Settings" on page 21. 

54

Clean and Troubleshooting 

Cleaning and Troubleshooting 

Cleaning 


Use a dry cloth to clean the unit. Never use water, cleaning detergents or spray 

cleaners. 

Troubleshooting 

If there are problems with the unit, please check the following points before contacting the technical service. 

Never open the unit. This may lead to electric shocks and will void the warranty. 

For TV 

No Picture or Sound 

• Make sure the receiver and the TV set are both connected to the 

mains and switched on. 

• Check whether the antenna cable is in proper condition and if it is 

connected to the respective sockets. See chapter "Connecting on 

board Digital Tuner" on page 10, “Connecting to the Roof Aerial or 

Cable Reception” on page10. 

Black Screen 

Picture OK but no Sound 

Poor Sound 

No Picture on Some Channels 

• Check whether a signal source is selected. See chapter “Select 

Source” on page 51 and “Select Input” on page 51. 

• Check wether the sound is set to mute or if it is turned down. 

See chapter “Set Volume” on page 50. 

• Check if the sound is ok on another channel. If this is the case,the 

program is broadcast improperly. 

• Switch between stereo and mono sound. 

See chapter “Set Stereo/Mono while Watching” on page 54. 

• Check if the channel has been tuned to a station. 

See chapter “Tuning” on page 18. 

• Adjust the fine tuning. See chapter “Fine Tuning” on page 20. 

Unstable, Poor Picture • Adjust the fine tuning. See chapter “Fine Tuning” on page 20. 

• Check if strong electromagnetic fields, e.g. caused by electric 

devices nearby cause the impairments. 

55

Clean and Troubleshooting 

Some Channels Display Black 

and White 

• Check if other channels display colours. If yes, the program is 

broadcast in black and white.Adjust the colour settings 

Snow on one or Several Channels 

• Check whether the antenna cable is in proper condition and if it is 

connected to the respective sockets. See chapter “Connecting on 

board Digital Tuner” on page 10, “Connecting to the Roof Aerial or 

Cable Reception” on page10. 

• Adjust the fine tuning. See chapter “Fine Tuning” on page 20. 

Remote Control Does Not Work 

Message "No Signal " 

Message "Video not Supported" 

Picture Scrolls Vertically 

Parts of the Picture are not Displayed 

• Make sure the unit is connected to the mains. 

Check whether the batteries are inserted correctly and 

whether they are sufficiently charged. To do this, insert new 

batteries for testing. 

• Check wether the connecting cable is properly connected to 

the computer and the respective sockets. 

• The resolution or the frequency of the graphic board in the 

computer cannot be displayed. 

Change the settings in the computer. 

• Check wether the connecting cable is properly connected to the 

computer and the respective sockets. 

• Check the resolution and the frequency of the graphic board in 

the computer. 

Adjust the settings. See chapter “Settings” on page 36. 

Picture Too Small or Too Large • Adjust the settings. See chapter “Settings” on page 36. 

Horizontal or Vertical Bars 

• Adjust the settings of the computer. See chapter “Settings for the 

Computer” on page 37 . 

56

Royal Sweden Manual â English - People of Lava

Create successful ePaper yourself

Delete template?

Save as template?

Royal Sweden Manual â English - People of Lava