COMPACT NS630b to 1600 A - Schneider Electric

More documents

Recommendations

Info

push O F O OFF push ON discharged push O F O OFF push ON discharged push O F O OFF push ON discharged Compact chassis Racking For complete information on Compact handling and mounting, see the installation manual(s). Removing the rails Press the release tabs and pull the rails out. To put the rails back in, press the release tabs and push the rails in. Before mounting Compact NS, make sure it matches the chassis. E71813A 1 E71814A 2 3 Inserting the device Open the circuit breaker (in any case, it opens automatically during connection). Position the circuit breaker on the rails. Check that it rests on all four supports. E71807A E60412A If you cannot insert the device in the chassis, check that the mismatch protection on the chassis corresponds to that on the device. Push the device into the chassis, taking care not to push on the control unit. E60411A E60410A I Push ON Push MERLIN GERIN O I O I E60409A O I 22 Compact NS Schneider Electric
Racking Prerequisites To connect and disconnect the device, the crank must be used. The locking systems, padlocks and the racking interlock all inhibit use of the crank. Racking the circuit breaker from the "disconnected" to "test" position, then to "connected" position The device is in "disconnected" position. DB110366A The indicator on the front signals the position of the circuit breaker in the chassis. E71815A The device is in "test" position. The device is in "test" position. Remove the crank or continue to "connected" position. b"connected" position E60413A Test The device is in "connected" position. E60414A b"test" position DB110365 Withdrawing the circuit breaker from the "connected" to "test" position, then to "disconnected" position The circuit breaker is in "connected" position. Test b "disconnected" position E60415A Test The circuit breaker is in "test" position. The circuit breaker is in "test" position. Remove the crank or continue to "disconnected" position. Note: These operations require that all chassis-locking functions be disabled (see page 24). The circuit breaker is in "disconnected" position. 23 Compact NS Schneider Electric
Page 1: Low Voltage Products COMPACT NS630b
Page 4 and 5: push to trip Discovering Compact Ra
Page 6 and 7: Manually operated Compact with a to
Page 8 and 9: push to trip push to trip push to t
Page 10 and 11: Manually operated Compact with a ro
Page 12 and 13: Manually operated Compact with a ro
Page 14 and 15: profalux Manually operated Compact
Page 16 and 17: Remote operated Compact Components
Page 18 and 19: Remote operated Compact Opening, cl
Page 22 and 23: push to trip Compact chassis Compon
Page 26 and 27: Compact chassis Locking in the "dis
Page 28 and 29: O push ON push O F O O F I push ON
Page 30 and 31: Compact chassis Locking the safety
Page 32 and 33: Electrical auxiliaries Electrical d
Page 34 and 35: Electrical auxiliaries Operation Th
Page 36 and 37: Electrical auxiliaries Electrical c
Page 38 and 39: Start-up Start-up operations Proced
Page 44: Schneider Electric Industries SAS 5

COMPACT NS630b to 1600 A - Schneider Electric

Create successful ePaper yourself

Delete template?

Save as template?