Published In Dec. - kyocera

(4) Installing the DIMM
The main board of the printer is equipped with one socket for installing extra DIMM.
CAUTION
WARNING
Be sure that no foreign objects such as metal chips or liquid get inside the
printer during installing DIMM. Operation of the printer during the presence of
a foreign substance may lead to fire or electric shock.
Before proceeding installation, turn the printer’s power switch off. Unplug the
printer’s power cable and disconnect the printer from the computer or the
network.
1. Turn the power switch off.
2. Remove the memory card (CompactFlash) that may be inserted in the memory card slot 1 at
the left side of the printer.
3. Remove the main board 2 by removing the two (plated) screws 3.
4. Pull the main board 2 all the way out of the printer.
2
1
3
3
Figure 2-2-8 Removing the main board
FS-1900
2-12