Published In Dec. - kyocera

(6) Installing the option hard disk (Microdrive)
The main board of the printer is equipped with a socket for the hard disk (Microdrive). If the hard
disk is installed in the printer, received data can be rasterized and stored on this hard disk. This
enables high-speed printing of multiple copies using an electronic sort function. Also, by using the
quick copy job function or private/stored job function, desired documents can be printed at any
later time. For details of these functions, refer to the printer’s Users Manual.
CAUTION
WARNING
Take precautions that no foreign objects such as metal chips or liquid get inside
the printer during the installation process. Operation of the printer during the
presence of a foreign objects may lead to fire or electric shock.
Turn the printer’s power switch off. Unplug the printer’s power cable and
disconnect the printer from the computer or the network.
1. Turn the power switch off.
2. Remove the main board 1 from the printer. (See step 2 to 4, on page 2-12.)
3. Install the hard disk 2 to the hard disk slot 3.
3
2
1
Figure 2-2-11 Installing the option hard disk
FS-1900
2-14