Published In Dec. - kyocera
Published In Dec. - kyocera
Published In Dec. - kyocera
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
(5) Message display<br />
The message display gives information in the form of short messages. The six messages listed<br />
below are displayed during normal warm-up and printing. Other messages appear when the printer<br />
needs the operator's attention as explained in Chapter 6 Troubleshooting.<br />
Message<br />
Self test<br />
Please wait<br />
Ready<br />
Processing<br />
Waiting<br />
Sleeping<br />
Cancelling data<br />
FormFeed Time Out<br />
Meaning<br />
The printer is self-testing after power-up.<br />
The printer is warming up and is not ready. When the printer is<br />
switched on the first time after the toner container is installed,<br />
(Adding toner) also appears.<br />
The printer is ready to print.<br />
The printer is receiving data, generating graphics, reading an memory<br />
card (CompactFlash)/hard disk (Microdrive), or printing.<br />
The printer is waiting for a command that says the job is over before<br />
printing the last page. Pressing the GO key allows you to obtain the<br />
last page immediately.<br />
The printer is in Sleep mode. The printer wakes from Sleep mode<br />
whenever a key on the operator panel is pressed, the cover is opened<br />
or closed, or data is received. The printer then warms up and goes<br />
on-line. (The time that it takes the printer to enter Sleep mode depends<br />
on the Sleep Timer setting.)<br />
Data inside the printer is being canceled.<br />
The printer prints the last page after a waiting period.<br />
FS-1900<br />
2-22
Change language