Published In Dec. - kyocera

2-2-3 Expanding the memory (DIMM)
The FS-1900 comes standard-equipped with 16 MB of main memory. The FS-1900 can be expanded
up to the maximum of 144 MB (16 MB + 128 MB). Expansion should be done using optional
DIMMs (Dual In-line Memory Module).
(1) Minimum memory requirements
Resolution
Printing environment 300 dpi 600 dpi 1200 dpi
(Emulation)
(Fast mode)
PCL6, duplex mode = None 8 MB 8 MB 8 MB
PCL6, duplex mode = On 8 MB 8 MB 8 MB
KPDL, duplex mode = None 8 MB 8 MB 8 MB
KPDL, duplex mode = On 8 MB 8 MB 12 MB
PCL6/KPDL resource protection, - 10 MB 10 MB
duplex mode = None
PCL6/KPDL resource protection, - 14 MB 14 MB
duplex mode = ON
(2) DIMM specifications
Item
Memory size in MB
Number of pins
Access speed
Parity
Bus width
Specification
16, 32, 64, 128 MB
100 pins
66 MHz
None
32 bits
FS-1900
2-10