Published In Dec. - kyocera

(8) Installing the option network interface card
The main board of the printer is equipped with a network interface card slot (KUIO-LV type, 3.3
V).
CAUTION
WARNING
Be sure that no foreign object such as metal chips or liquid get inside the
printer during the installation process. Operation of the printer during the
presence of a foreign object may lead to fire or electric shock.
Turn the printer’s power switch off. Unplug the printer’s power cable and
disconnect the printer from the computer.
1. Turn the power switch off.
2. Remove the two screws 1 then remove the option interface card slot cover 2.
3. Insert the network interface card 3 to the option interface card slot 4.
4. Fix the network interface card 3 by two screws 1.
5. Connect the network cable 5 to the network interface card 3.
6. Set the network address from the printer operator panel. (Refer to the printer’s User’s Manual)
2
1
3
5
4
Figure 2-2-13 Installing the option network interface card
3
FS-1900
2-16