Quick Selection
Quick Selection
Quick Selection
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
KVP Evaporator pressure regulator<br />
The KVP is mounted in the suction line after the evaporator and is maintaining a constant evaporating<br />
pressure and thereby a constant surface temperature on the evaporator. The regulation is modulating.<br />
By throttling in the suction line, the amount of refrigerant gas is matched to the evaporator load.<br />
Features<br />
Accurate, adjustable pressure regulation<br />
with allen key<br />
"Hermetic" brazed construction<br />
Stainless steel bellows<br />
Compact angle design for easy<br />
installation in any position<br />
Pulsation damping design<br />
1<br />
/ 4<br />
in. Schrader valve<br />
for pressure testing<br />
Available with flare and<br />
ODF solder connections<br />
Applications Advantages Facts<br />
· Traditional refrigeration<br />
· Air conditioning units<br />
· Transport refrigeration<br />
· The KVP can also be used to differentiate<br />
the evaporating pressures in two<br />
or more evaporators in systems with<br />
one compressor.<br />
· Protection against too low an evaporating<br />
pressure (e.g. as protection<br />
against freezing in a water chiller). The<br />
regulator closes when the pressure<br />
in the evaporator falls below the set<br />
value.<br />
· Wide capacity and operating range<br />
· Regulation range: 0 to 5.5 bar<br />
· For use with CFC, HCFC and HFC<br />
refrigerants<br />
46
Change language