English manual

More documents

Recommendations

Info

$C:\Disegni\Riuniti\66R Ecoline\Documentazione\66R-hydr Manuale ...$

PREPARATION INSTALLATION WARNING To avoid fire/electric shocks, connect the power plug to a 3P AC outlet (with ground) and secure grounding. CAUTION To avoid injury by falling, do not install the instrument on a slope or in an unstable place. 1 Remove the tape from the lens support. 2 Remove the tape from the marking ink cartridge. 3 Remove the port cover. Push the etched mark and move the cover to the arrow direction. Etched mark 4 Plug in the power cable to the AC adapter. 5 Pass the cable through the cable clamp. 6 Connect the AC adapter plug to the AC adapter jack located on the rear panel of the main body. IN OUT AC adapter cable Cable clamp 18 PREPARATION
7 Setting the Port Cover. Etched mark The stop to be fitted first Fit the stop of the figure above to the main body. After fitting the stop, turn the cover along the arrow direction. Fit the stop by pushing the etched mark. By connecting an AC adapter, the main body starts automatically. SETTING THE PAPER 1 Press the PRINTER button and open the cover. 2 Open the printer cover to the limit. 19 PREPARATION
Page 1: FRONT COVER USER MANUAL COMPUTERIZE
Page 4 and 5: 1. No part of this manual may be co
Page 6 and 7: SETTING FUNCTIONS ON SETUP SCREEN O
Page 8 and 9: HOW TO READ THIS MANUAL • Read th
Page 10 and 11: WARNING INDICATIONS AND POSITIONS T
Page 12 and 13: COMPONENT NAMES with PD Back side N
Page 14 and 15: CONTROL PANEL COMPONENTS THE FUNCTI
Page 16 and 17: MEASUREMENT SCREEN SINGLE MODE Lens
Page 18 and 19: RESULT DISPLAY When INITIAL/DISPLAY
Page 22 and 23: 3 Insert the printer paper in the d
Page 24 and 25: MEASURING A SINGLE FOCAL LENS When
Page 26 and 27: MEASURING A PROGRESSIVE LENS When a
Page 28 and 29: 6 The condition illustrated below i
Page 30 and 31: MEASURING BI-FOCAL AND TRI-FOCAL LE
Page 32 and 33: MEASURING A CONTACT LENS MEASURING
Page 34 and 35: A:STEP MODE Select INITIAL/A:STEP/5
Page 36 and 37: AXIS MARKING (CARTRIDGE SPECIFICATI
Page 38 and 39: MARKING A LENS WITH PRISM POWER •
Page 40 and 41: SETTING A SEQUENCE NO. Setting is c
Page 42 and 43: 6 Follow the similar steps to measu
Page 44 and 45: SETTING FUNCTIONS ON SETUP SCREEN O
Page 46 and 47: • Instead of the options button,
Page 48 and 49: AUTO R/L R/L Measurement of framed
Page 50 and 51: LAN CONNECTION (LAN) LAN contains s
Page 52 and 53: SUPPLY OF INK FOR THE OPTIONAL STEE
Page 54 and 55: SPECIFICATIONS SPECIFICATIONS Measu
Page 56 and 57: MAINTENANCE AND CHECKS 1. Regularly
Page 58 and 59: Guidance and manufacturer's declara
Page 60 and 61: Recommended separation distance bet
Page 62 and 63: USING THE INSTRUMENT AS A SYSTEM Th
Page 64: ACK COVER COMPUTERIZED LENSMETER CL

English manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?