bizhub PRESS C8000 Specification & Installation Guide

Konica Minolta bizhub PRESS C8000
Specification & Installation Guide
Component Considerations continued
Finisher FS-521
Type
Staple-cut type stapling equipment
Delivery modes
Straight mode
Deliver non-offset sets to the primary (main) tray.
Shift mode
Offset each set upon exit to the primary (main) tray.
Secondary (sub) tray mode
Deliver non-offset sets to the secondary (sub) tray.
Staple mode
Deliver stapled sets to the primary (main) tray.
Subset staple mode
Deliver stapled sets or single sheet to the primary (main) tray.
FS-521 SD-506 LS-505 RU-508 EF-101 PRESS C8000
Available sizes
Large sizes: 13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, A3L,
PI-502
in primary (main) tray B4L, Foolscap, SRA3L, SRA4L/P, Custom (Max. 12.76" x 18.11"
(straight/offset delivery) (324 mm x 460 mm))
Small sizes: 8.5" x 11"L/P, A4L/P, B5L/P, 9" x 11"P
Extra-small sizes: 5.5" x 8.5"L/P, A5L/P,
RU-508
B6L
Others: Custom (Max. 12.76" x 18.23" (324 mm x 463 mm) to min.
5.83" x 5.47" (148 mm x 139mm)), Tab Paper (only with the tab side
ahead in output direction)
Straight delivery only: 13" x 19.2"L, 5.5" x 8.5"L, B6L, Custom
PK- (Max. 13" x 19.2" (331 mm x 483 mm) to min. 5.04" x 5.47"
512 (128 mm x 139 mm))
Available weight 17 to 93 lb. Bond (64 g/m 2 to 350 g/m 2 )
in primary (main) tray
(straight/offset delivery)
SD-506 RU-506 FD-503 FS-612
PB-503
Available sizes in primary
(main) tray (Staple)
HT-506
12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"P, SRA3L,
A3L, B4L, A4L/P, SRA4L/P, B5P, A5P, Foolscap, 9" x 11"P,
Custom, Tab Paper (only with the tab side ahead in output direction)
HT-506
Max. 12.76" x 18.23" (324 mm x 463 mm) to min. 7.99" x 5.47"
(203 mm x 139 mm)
Available weight in primary 17 to 65 lb. Bond (64 g/m 2 to 244 g/m 2 )
(main) tray (Staple)
Available sizes in
secondary (sub) tray
PF-704
GP-501
13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P,
5.5" x 8.5"L/P, SRA3L,
IC-306
A3L, B4L* 1 , A4L/P, SRA4L/P,
B5L/P* 1 , A5L/P, B6L, 9" x 11"P,
Custom, Tab Paper (only with the tab side ahead in output direction)
PF-705
Max. 13" x 19.2" (331 mm x 488 mm) to min. 3.94" x 5.24"
(100 mm x 133* 2 mm)
*1: B4 and B5 are JIS standard sizes. If ISO standard sizes are desired,
please contact your service representative.
*2: Only when FS-521 is installed as the sole option. It will be v5.47" (139 mm)
when any other option is installed.
Available weight in 17 to 65 lb. Bond (64 g/m 2 to 244 g/m 2 )
secondary (sub) tray
HM-101
HD-514
PH-101
Dimensions
Weight
Power source
Power consumption
21.42"(W)* x 28.46"(D) x 40.16"(H); (544 (W)* x 723 (D) x 1,020 (H) mm)
* Width including primary (main) tray: 31.42 inches/ 36.02 inches (with the edge pulled out)
Approx. 176.4 lbs. (80 kg)
24/5 VDC (supplied from Relay Unit RU-508,
or from Perfect Binder PB-503 when connected)
See ‘Power Source’ section for additional detailed image.
110 VA
22