bizhub PRESS C8000 Specification & Installation Guide

Konica Minolta bizhub PRESS C8000
Specification & Installation Guide
506 LS-505 RU-508 EF-101 PRESS C8000
Component Considerations
PI-502
Folding Unit FD-503
Function
RU-508
Number of punch holes 2 or 3
Punch, multi-folding, post inserting of single sheet
PK-
512
Hole diameter
Hole pitch
2 holes: 0.256" ± 0.020" (6.5mm± 0.5 mm)
3 holes: 0.315" ± 0.020" (8.0mm± 0.5 mm)
2 holes: 2.756" ± 0.020" (70mm± 0.5mm)
3 holes: 4.252" ± 0.020" (108mm± 0.5 mm)
RU-506
FD-503
FS-612
Hole vertical position
GP-501
HM-101
2 holes: 0.413" ± 0.157" (10.5 mm ± 4 mm)
3 holes: 0.374" ± 0.157" (9.5 mm ± 4 mm)
Paper Weight in Punch Mode 17 to 57 lb Bond (64 g/m 2 to 216 g/m 2 )
HT-506
Available Sizes
2 holes: 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, in
Punch Mode
5.5" x 8.5"P, SRA3L, A3L, B4L, SRA4L, A4L/P, B5L/P,
A5L/P, Foolscap, 9" x 11"P, Tab paper
3 holes: 12" x 18"L, 11" x 17"L, 8.5" x 11"P, SRA3L, A3L, B4L,
SRA4L, A4P, B5P, 9" x 11"P, Tab paper
HD-514
Fold type
Z-Fold, Tri-Fold-in, Tri-Fold-out, Half-Fold, Double Parallel, Gate
PH-101
Paper weight in Fold mode Z-Fold, Tri-Fold-in, Tri-Fold-out, Half-Fold: 17 to 35 lb Bond (64 g/m 2
IC-306
to 130 g/m 2 )
Double Parallel, Gate: 17 to 24 lb Bond (64 g/m 2 to 91 g/m 2 )
HT-506
PF-704
PF-705
Available Sizes in Fold Mode 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L, SRA3L, A3L, B4L, SRA4L,
A4L, Custom
Max. 12.01" x 18.03" (305 mm x 458 mm) to min. 8.27" x 10.98"
(210 mm x 279 mm)
Straight Delivery
Deliver sheets output from the main body to the primary (main) tray
or secondary (sub) tray.
Paper Weight 13 to 93 lb Bond (50 g/m 2 to 350 g/m 2 )
in Straight Delivery
Available Sizes
in Straight Delivery
13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P,
5.5" x 8.5"L/P, SRA3L, A3L, B4L, SRA4L/P, A4L/P, B5L/P,
A5L/P, B6L, Foolscap, A6L, Custom, Tab Paper (only with the
tab side ahead in output direction)
Max. 13" x 19.2" (330 mm x 487 mm) to min. 3.94" x 5.51"
(100 mm x 140 mm)
Paper Types in Post Inserter Plain, recycled, fine, special
Paper Weight in Post Inserter 13 to 80 lb Bond (50 g/m 2 to 300 g/m 2 )
Available Sizes
in Post Inserter
Stack Capacity
of PI Upper/Lower Tray
Dimensions
Weight
Power source
Standard (detectable sizes): 13" x 19.2"L, 12" x 18"L, 11" x 17"L,
8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5" P, SRA3L, A3L, B4L,
SRA4L/P, A4L/P, B5L/P, A5 P, Foolscap, Custom, Tab Paper
Max. 13" x 19.2" (331 mm x 483 mm) to min. 7.17" x 10.98"
(182 mm x 279 mm)
500 sheets (21 lb Bond) for each tray
15.75"*(W) x 28.46"(D) x 48.46"(H)"; (400* (W) x 723 (D) x 1,231 (H) mm)
* Width including primary (main) tray: 26.26"/ 30.87" (with the edge pulled out)
Approx. 286.6 lbs. (130 kg)
100 to 240 VAC; NEMA: 5-20R;
See ‘Power Source’ section for additional detailed image.
23