bizhub PRESS 1250/1250P/1052 Specification & Installation Guide

Konica Minolta bizhub PRESS 1250/1250P/1052
Specification & Installation Guide
Component Considerations continued
Post Inserter PI-502 (Mount Kit MK-732/Equipped in Finisher FS-532)
Type
Function
Paper AU-202H sizes
Paper AU-211P type
Paper weight
Cover paper feeding equipment
AU-202H
AU-204H
Automatic Feed paper into the finisher on receiving a command from
the main body.
AU-211P
Manual Feed paper into the finisher on receiving a command manually sent
from the control panel of the post inserter.
Upper AU-204H tray Standard: 8.5" x 11"L/P, 5.5" x 8.5"P, A4L/P, B5L/P, A5P
Lower tray Standard: 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P,
5.5" x 8.5"P, A3L, B4L, SRA4L, A4L/P, B5L/P, A5P,
Foolscap
Plain, Recycled, Fine
14 to 53 lb. Bond
Stack capacity
Dimensions
Weight
Power source
Max. Power Consumption
200 sheets (22 lb. Bond) or within 30 mm thick for each of upper/lower tray
Post Inserter PI-502 only: 20.08 (W) x 24.36 (D) x 8.64 (H) inches
Approx. 23.1 lb. (Not including 6.61 lb. of Mount Kit MK-732)
24/5 VDC supplied from main body
30 W or less
Multi Puncher GP-501 (Die Set DS-501 to DS-507)
Speed
bizhub PRESS 1250: 120 sheets/min.
bizhub PRESS 1052: 105 sheets/min.
Sheet size 8.5" x 11"P
Punch edge
Paper weight
Bypass sheet size/weight
Punch capacity
Power supply
Electrical
Safety
Dimensions
Weight
Shipping weight
11 inches
20 to 57 lb. Bond (80 lb. Cover)
Same as main body
Single sheet
115V, 60Hz, Single Phase
BTUs/Hour 1100 BTU/HR
Watts 322 W
Amps 2.8 A
TUV/GS, CE
12 (W) x 30.5 (D) x 40 (H) inches
Approx. 170 lb.
Approx. 270 lb.
26