You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ASSEMBLING THE MACHINE<br />
INSTALL WEIGHT STACK LABELS<br />
1. Verify that there are 16 weight plates installed on each stack.<br />
2. Wipe the front surface of the weights with isopropyl alcohol and allow to dry completely.<br />
3. Remove the backing from the label. Vertically center the 10 lb. label on the top weight and align<br />
the side of the label liner (front surface) with the outside edge of the pin hole in the weights.<br />
4. Verify that the label strip is straight and then remove the liner. As the liner comes off the labels,<br />
press and rub each label into place.<br />
5. Allow the adhesive to cure for 48 hours. DO NOT attempt to “test” the integrity of the labels after<br />
they have been installed.<br />
6. The part number is B2173 for the 85 lb. label and B2173KG for kg. label.<br />
Individual Labels<br />
LINER<br />
Align with outside<br />
edge of pin holes<br />
ASSEMBLE THE SELECTOR PINS<br />
ATTACH LANYARD RING<br />
9
Change language