Hot Rods & Custom Stuff is a part of the Southern ... - Parts & People

PHOTO BY DICK DELOACH
The Lincoln Electric 180 Dual MIG
welder features 120-volt or 208/230-volt
input power, cast aluminum gear-driven
drive rolls, patented split-wire guides for
optimal wire alignment, Diamond Core
Technology for superior arc, excellent outof-position
arc action, low spatter, and a
wide-voltage sweet spot. It is spool-gun
ready.
Continued from page 26
RX16 improves productivity with optional
time-saving features such as an Inflation
Station that uses retractable air hoses to set
tire pressure to a preset limit for each wheel
simultaneously.
Ingersoll Rand introduces its
W7150 Cordless Impactool, and
wins award at SEMA
Ingersoll Rand has received a 2011
SEMA Editor’s
Choice Award from
Popular Mechanics
for the W7150 High-
Torque Cordless
Impactool, the most
powerful cordless
impact wrench on
the market,
according to
company officials.
The Ingersoll Rand
W7150 1/2-inch
cordless Impactool
was awarded as one
of the top 15
products, the only
power tool to be
recognized in the
top 15.
The W7150 features a best-in-class
power-to-weight ratio, offering 780 ft-lb.
of reverse torque, and 1,100 ft-lb. of nutbusting
torque. It offers maximum
durability and power with a chemicalresistant,
patent-pending, metal-reinforced
housing and an all-metal drivetrain and
hammer mechanism. The tool is powered
by the Ingersoll Rand IQV20 Series
lithium-ion battery platform. n
PHOTO BY DICK DELOACH
The Pro Spot i5 SMART spot welder features a new
medium-frequency trans-gun capable of delivering more
than 13,000 amps and more than 1,000 lbs. (450dAN) of
squeeze pressure. It is designed to handle all new ultra
high-strength steels including Boron. It also features auto
and manual modes for two-sided spot welding.
The W7150 Impactool features a
best-in-class power-to-weight ratio,
offering 780 ft-lb. of reverse torque,
and 1,100 ft-lb. of nut-busting
torque.
PHOTO BY DICK DELOACH
Jack Vandervelde, from Pro Tek Spray
Equipment, shows the new Jetair AF-08WR
wall-mounted waterborne drying system,
which features air hoses, sliding tracks, and
adjustable 1,200-CFM combination stainlesssteel
and aluminum fans to eliminate static
sparks.
PHOTO BY DICK DELOACH
One of the newest CNC prototyping
systems from Lincoln Electric is the
Torchmate 2x2 Growth Series, which includes
the Tomahawk 625 Ready-Pak plasma cutter
and operates with Torchmate 2x2 Driver, CAD
Lite, and most other leading CAD software.
Parts & People February 2012 Page 27