Norsk varemerketidende nr 52 - 2003 - Patentstyret

Norsk varemerketidende internasjonale registreringer nr 52 - 2003.12.22
(111) Int. reg. nr.: 789519
(151) Int. reg. dato: 2002.06.27
(540)
(591) Merket er i farger
(730) Innehaver: Société Nationale d’Etude et de
Construction de Moteurs d’Aviation, 2, Boulevard du
General Martial Valin, F-75015 Paris Cedex, FR
(511) Vare- / tjenesteklasser:
KL. 1: Thermostructural composites for use in satellites,
rockets, missiles, aerospace vehicles, aircraft engines and
brakes; artificial and synthetic resins; plastics in powder,
liquid or paste form, for industrial use; chemical
preparations for use in industry; honeycomb structures in
plastic materials used as reinforcements for structures in
the aerial and aerospace sectors; refractory materials,
carbon-carbon, carbon-SiC and SiC-SiC composites used
for engines and specifically for the aerospace industry and
for friction parts; organic matrix composites (OMC) and
ceramic matrix composites (CMC); absorbent carbons,
textile-impregnating chemicals, carbon textile products.
KL. 6: Laminated materials formed of successive layers
of elastomers and metallic or composite reinforcements;
metal matrix composites (MMC).
KL. 7: Solid propellant rocket engines for satellite
launchers and for ballistic and tactical missiles;
component parts of these engines.
KL. 9: Electric, electronic and magnetic sensors for
pressures, speeds, displacements, temperatures,
positions, vibrations; component parts of these sensors.
KL. 11: Apparatus for lighting, heating, steam generating,
cooking, refrigerating, drying and water supply; heat
accumulators and regenerators; heat exchangers, heat
exchangers for use in space propulsion; thermal
processing kilns and kiln floors, intermediary trays and
crosspieces for use in kilns, all made of composite
materials with a preform (fibrous reinforcement texture)
of carbon or ceramic; heating resistances, thermal
protective devices in the form of kiln linings and fittings
excluding filters.
KL. 12: All aerial and space vehicles; space launchers,
space rockets; space shuttles for use in space, equipped
with hypersonic means of propulsion; friction, shock
absorbing, clutch and/or braking devices for land, motor or
rail vehicles; braking devices for aerial vehicles.
KL. 13: Rocket-propelled ballistic and tactical missiles;
electro-pyrotechnic initiators, pyrotechnic initiators using
laser beam energy transmission for engine pyrotechnic
appliances; opto-pyrotechnic fuses.
KL. 17: Rings, seals, elastomeric plates; sealing devices
and packings; laminated materials made up of successive
layers of elastomers and metallic or composite
reinforcements, laminated flat, cylindrical, spherical,
annular or conical products namely flexible rings, flexible
seals, flexible bearings and gates, flexible monoball
bearings (articulated or not), for achieving sealing between
two or more rigid or pliable assemblies.
KL. 19: Non-metallic refractory materials; floors,
intermediary plates, crosspieces and fittings made for
industrial kilns and tooling for thermal processing.
KL. 22: Raw fibrous textile materials with high
mechanical, thermal or frictional resistance, used for
engines and more generally for aeronautical and aerospace
construction, for biomaterials, and for friction parts such
as brakes and clutches; three-dimensional multilayer
mouldable textures woven from carbon- or ceramic-mesh
fibres; textures with fibrous architecture, reinforced with
composite materials, made by needle-bonding of
multidirectional layers of carbon fibres, obtained by layer
stacking of wide ribbons of discontinuous parallel fibres
or continuous fibres, of carbon, ceramic, or of precursors
of carbon and ceramic.
KL. 38: Transmission of information and support on line
concerning reconditioning and substitute servicing of
engines and/or engine modules used in the aeronautical and
space sectors; transmission of information concerning
training in reconditioning of engines and/or engine modules
used in the aeronautical and space sectors; transmission of
information stored in a data bank concerning
reconditioning and substitute servicing of engines and/or
engine modules used in the aeronautical and space sectors;
transmission of information via radio and/or television
channels using satellite communications or not concerning
reconditioning, substitute servicing, renting of and training
concerning engines and/or engine modules used in the
aeronautical and space sectors; dissemination of
information via networks and in particular via intranets
and the Internet on reconditioning, substitute servicing,
renting of and training concerning engines and/or engine
modules used in the aeronautical and space sectors.
KL. 40: Treatment of composite materials by
siliconising, carbonising, densification and physicochemical
treatments of fibres and textures; services of
textile finishing, treatment of textiles, activation of fibres,
textiles and textures; physico-chemical operations or
treatments for anti-oxidation or anti-corrosion proofing
for non-metallic composite materials.
KL. 42: Scientific and industrial research, namely
biological research, chemical research, morphological
research and thermal research, research in mechanics,
research and development of new products (for third
parties); engineering services, namely expert reports,
engineering project studies; professional advisory and
consulting services in connection with engineering;
materials testing; laboratory services, namely
standardisation and verification services in the fields of
metrology, chemistry, morphology and thermics;
computer software design and development and computer
programming.
Gazette nr.: 22/02
(300) Prioritet:
FR, 2002.01.17, 02 3 142 128
75