TC35i Module TC35i Terminal

More documents

Recommendations

Info

TC35i AT Command Set Confidential / Released Reference V.25ter/GSM 07.07 Note There is no for emergency call (“EN”). The command is not applicable to data calls. Any attempt to dial a data call number from causes the result code “NO CARRIER” to appear. Parameter only if no *# code is within the dial string. *# codes sent with ATD are treated as voice calls. Therefore, the command must be terminated with a semicolon “;”. See ATX command in Chapter 2.31 for setting result code and call monitoring parameters. Example To query the location number of the phone book entry: AT+CPBR=1,xx TA returns the entries available in the active phone book. To dial a number from the SIM phone book, for example the number stored to location 15: ATD>SM15; OK To dial a phone number stored in the last dial memory on the SIM card: ATD>LD9; OK TC35i_ATC_V01.05 Page 24 of 278 04.08.2003
TC35i AT Command Set Confidential / Released 2.7 ATD> Originate call to phone number selected from active memory This command can be used to dial a phone number selected from the active memory. The active memory is the phone book selected with AT+CPBS (see Chapter 4.33). To set up a call simply enter the memory location of the desired entry. The memory location range of each phone book can be queried by AT+CPBR (see Chapter 4.32). Execute command ATD>[]; TA attempts to set up an outgoing call to the stored number. The command may be aborted generally by receiving a character during execution. Abortion is not possible during some states of connection setup such as handshaking. Response If error is related to ME functionality: +CME ERROR: If no dialtone (parameter setting ATX2 or ATX4): NO DIALTONE If busy (parameter setting ATX3 or ATX4): BUSY If a connection cannot be set up: NO CARRIER If successfully connected: OK Reference V.25ter/GSM 07.07 Parameter Integer type memory location should be in the range of locations available in the memory used, i.e. the number returned by AT+CPBR. String of GSM modifiers: I Activates CLIR (disables presentation of own phone number to called party) i Deactivates CLIR (enables presentation of own phone number to called party) The semicolon is mandatory since dialing from a phone book is only supported for voice calls. Note Parameter only if no *# code is within the dial string. The command is not applicable to data calls. Any attempt to dial a data call number from causes the result code “NO CARRIER” to appear. *# codes sent with ATD are treated as voice calls. Therefore, the command must be terminated with a semicolon “;”. See ATX command in Chapter 2.31 for setting result code and call monitoring parameters. TC35i_ATC_V01.05 Page 25 of 278 04.08.2003
Page 1 and 2: Siemens Cellular Engines TC35i Modu
Page 3 and 4: TC35i AT Command Set Confidential /
Page 23: TC35i AT Command Set Confidential /
Page 75 and 76:
TC35i AT Command Set Confidential /
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
show all

TC35i Module TC35i Terminal

Create successful ePaper yourself

Delete template?

Save as template?