AIR CONDITIONING - Rafstjorn
AIR CONDITIONING - Rafstjorn
AIR CONDITIONING - Rafstjorn
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
23. Faults, Probable Causes, Possible Remedies<br />
23.1 FAILS TO COOL<br />
.1 No part is working;<br />
.1 Lack of voltage to the unit;<br />
.1 Check that doors closed and switches are turned on.<br />
.2 Compressor, condenser fan and evaporator fan not working;<br />
.1 Cooling system has run out of refrigerant;<br />
.1 Contact STULZ technician or service department;<br />
.2 Compressor mechanically defective;<br />
.1 Contact STULZ technician or service department.<br />
.3 Compressor and condenser fan working, evaporator fan not working;<br />
.1 fan capacitor is defective;<br />
.1 Replace fan capacitor;<br />
.2 Evaporator fan defective;<br />
.1 Replace fan.<br />
.4 Condenser and evaporator fan working, compressor not working;<br />
.1 Where present, compressor circuit breaker defective;<br />
.1 Replace circuit breaker and check efficiency of the compressor's<br />
electrical parts;<br />
.2 Compressor start relay defective;<br />
.1 Replace compressor start relay;<br />
.3 Where present, start-up condenser defective;<br />
.1 Replace start-up condenser;<br />
.4 Compressor motor defective;<br />
.1 Contact STULZ refrigerant system technician or service department.<br />
.5 High pressure switch defective;<br />
.1 Contact STULZ refrigerant system technician or service department;<br />
.6 Where present, compressor remote control switch defective<br />
.1 Replace remote control switch.<br />
.5 Evaporator and condenser fan and compressor working;<br />
.1 Adjustment thermostat defective or calibrated at a temperature exceeding<br />
the temperature in the cabinet;<br />
.2 When present, anti-freeze thermostat defective.<br />
23.2 FAILS TO COOL SUFFICIENTLY<br />
.1 Evaporator fan working, compressor and condenser fan working<br />
intermittently<br />
.1 Service anti-freeze thermostat;<br />
.1 Clean evaporator<br />
.2 Check for any external causes which may limit the airflow to the<br />
inside circuit;<br />
.2 Where present, service low pressure switch;<br />
E/0304/31A/39