Download Pulse Manual - Apeks

Pre-Dive Checklist
Before making a dive, it is important that you make sure you go
through the following checklist:
1. Make sure the time and date is set correctly. Remember, the
Pulse records the time and date of each dive into memory.
2. Check the Altitude sector and make sure it matches the altitude
of the dive site.
3. Go into Dive Settings Mode (page 22) and make sure all the parameters
are set correctly, including the water type, safety factor,
profile recording interval, and FO 2
settings for mix 1 & mix 2.
4. Go to Plan Mode (see page 26) and review your no-decompression
time limits.
5. GO DIVING.
48