zehnder charleston zehnder charleston completto zehnder ...

Recommended mounting sets for easy installation.
zehnder charleston - zehnder charleston completto
The following table shows three different brackets for Zehnder Charleston. The desired mounting set can be ordered by indicating the
brackets name (for example, SSK Set)
The required number of brackets will be supplied with the radiator.
The brackets type determines the distance to the wall and the connection size. This information is included in the table.
SSK Set
CVD Set
BKE Set
Nominal radiator height
300 – 900 mm
260 – 1200 mm
260 – 1200 mm
Depiction of brackets
and support brackets
with the radiator
(1 vertical mounting line)
Brackets position
SSK
on top: BH + CVD
on bottom: BH +CVD
on top: BH + BKE
on bottom: BH +BKE
Distance to wall WA
(from the wall to radiator’s
back edge)
Distance A
(from the wall to rear
connection centerline)
WA
A
WA
A
WA
A
WA
A
min.100
min.100
min.100
min.100
WA [mm]
A [mm]
WA [mm]
A [mm]
WA [mm]
A [mm]
2-column model
3-column model
4-column model
5-column model
6-column model
20
20
20
20
20
51
70
88
107
125
43
43
43
43
43
74
93
111
130
148
35 – 65
35 – 65
35 – 65
35 – 65
35 – 65
66 – 96
85 – 115
103 – 133
122 – 152
140 - 170
1)
Installation recommendation for BH brackets: middle (bolt) 120 mm from the radiator’s upper or lower edge
2)
With the radiator height > 1200 mm, CVD and BKE mounting sets are of limited use. With bottom connection,
2)
or with bottom side connection, when connecting to plastic pipes or if the radiator weight exceeds 100 kg,
2)
we recommend using the TKA mounting set (special order) for installation.
3)
To prevent the lifting of the radiator, the BKE mounting set may be used in combination with BFS 1 safety springs (special order)
10