zehnder charleston zehnder charleston completto zehnder ...

Product description
zehnder bank-radiator
The picture shows model B 6150/5
Description
Zehnder Bank-Radiator is a tube-type, sectional, steel radiator with
4-6 columns. The radiator collectors are made of 1.5 mm thick steel
sheet, tube diameter – 25 mm, wall thickness – 1.25 mm, individual
horizontal sections are welded to form a complete radiator. With
brackets comprised of bench supports and frames for sub-floor installation,
lacquered to match the radiator colour. The seat is selected
individually.
The radiator is primed, coated with RAL 9016 colour powder enamel,
and improved in accordance with DIN 55900.
The heat capacity is tested in accordance with DIN EN 442 standard.
The radiator complies with the requirements of the GUV (German Accident
Insurance). The radiator complies with the stringent hygienic
requirements and is recommended for use in medical institutions.
The radiator is supplied in an installation-ready package.
Bottom, opposite-end connection (female thread) 2 x 1 /2”
by request:
• other connection codes,
• other colour choice from 700-colour palette of RAL and NCS S
Standard equipment
• bottom, opposite-end connection 2 x 1 /2”
• air vent in the lateral part of the radiator
• radiator is primed and finished with powder enamel
• of RAL 9016 colour
• brackets finished in RAL 9016 colour (without the seat)
• air-vent, 1 /2”
Seat not included in the kit
Advantages
• dual function: used as a bench and as a radiator
• various seat heights
• ability to individually select the seat
• ability to turn the radiator to the right or left
• simple cleaning (for example, with the special
• Zehnder brush made of lamb’s wool)
• The radiator complies with the requirements of
• the GUV (German Accident Insurance).
Installation length
from 1200 to 3000 mm
Installation height
from 469 to 653 mm
Installation depth
from 136 to 210 mm
Operating pressure, max:
10 bar
(Test pressure 13.0 bar)
Operating temperature max. 120°
20