Commands - Sanyo Denki America, Inc.

1. Safety Precautions
1.1 Introduction
The PB system is designed for use in general manufacturing equipment.
Please observe the following instructions:
Read this User Manual carefully before any installation or assembly, to ensure proper use.
Do not perform any retrofitting or modification of the product.
Consult with a sales representative or a qualified technician regarding installation and maintenance.
Special considerations, such as redundant services or an emergency generator are required when operating,
maintaining and/or controlling devices in the following applications. Contact our office if:
The device is used in medical instruments used for life support.
The device is used in trains or elevators, the failure of which could cause bodily injury.
The device is used in computer systems of social or public importance.
The device is used in any equipment related to human safety or public infrastructure.
Please contact our office if the device is to be used in an environment where vibration is present, such as
in-vehicle or transport applications.
Before installing, operating, performing maintenance or inspecting this device, read this entire manual
carefully to ensure proper use. Use this device only after learning about the device, its safety information
and the precautions related to its use.
After reading this User Manual, keep it in a place where it is always visible to the user.
1.2 Location of warning labels on the product
Warning labels are located on the front panel of the servo amplifier.
M TION
PB
SW1
CN3
C
N
7
N
2
C
CN4
C
N
1
C
N
5
11