POLYMIN - University of Waterloo

POLYMIN 2005
Input options
1.0 0.5 0.0 ;WP,WA,WB,Leissman terms
0 50.0 0 0 1 0 0 ;KMAS,PTIME,KTS,kiter,kbypass,kint,kdim
0 7 2 0 0 ;KPRT,NPRT,LPRT,N1,N2
0.1 0.5 1. 5. 10. 20. 50. ;(PRNTT(I),I=1,NPRT)
where:
wp,wa,wb are the Leisman weighting terms (leave these as is)
kmas - mass weighting
= 0 for lumped mass matrix
= 1 for consistent mass matrix
ptime - time to save solution to restart file
kts - restart option
= 0 for normal start
= to use restart option, read initial conditions from file
kiter = 0 for sequential physical-chemical coupling,
= 1 for iterative coupling
kbypass= 0 for minteq solution everywhere,
= 1 for minteq bypass when calculated changes from transport solution are small
kint = 0 for direct integration
= 1 for numerical integration (added 1995 by jwhm)
kdim = 0 for 2D
= 1 for axisymmetric
kprt - flag to print intermediate solutions
nprt - number of print times
lprt - flag for printout type for plotting
= 1 for id simulations, conc vs time at exit boundary
= 2 for 2d simulation
= 3 for 1d conc vs distance profiles
= 4 for 1d simulations,conc vs time at two distance ( nodes n1 and n2)
= 5 for 1d vertical simulations conc. vs depth
n1,n2 - nodes on 1d simulation distance profiles to print out
prntt - print/plot flag, print out at nprt times
27