EBC Turbo Groove Discs - JR Motors

RACING CALIPER FITMENTS
Brand & Caliper
Design #
Yellowstuff
4000 Series
Brand & Caliper
Design #
Yellowstuff
4000 Series
RACE MATERIAL SELECTION
All part numbers above are shown with a “4” prefix designating our Yellow material.
To select other materials change first letters and digits to:
“DP2” to select Greenstuff (example DP2241)
“DP5” to select Bluestuff Endurance (example DP5241)
“SINT” to select new Sintered Material (example SINT197/2)
CAUTION: Front and rear pad choices
Never put a higher friction pad on the rear when a low friction pad is used on the front.
For example, if Green is used on the front, use Green on the rear, if Red is used on the front, use Red on the rear etc.
BEDDING-IN HINTS
Disc condition is critical but with a flat disc try to allow two laps driving minimum with only gentle brake operation before subjecting pads to a further
two laps at normal practice speeds before commencing a race.
WARRANTY IN RACE USE - There is none.
MATERIAL SPECIFICATIONS
EBC PAGID FERODO MINTEX
Green S-Line DS2000 M1144
Yellow RS4-2 DS3000/4003 M1155
Blue RS19 DS3000 Endurance M1166
Sintered RS15
New EBC Sintered Pads (SINT Series)
Available for selected pad designs including popular Exige and
single seaters, sintered pads have 0.6 friction upto 900°C.
364 Please check full size illustrations to confirm application data.