EBC Turbo Groove Discs - JR Motors

TECHNICAL SPECIFICATIONS
DIMENSIONS & CATALOGUE ABBREVIATIONS
S = SOLID V = VENTED F = FRONT R = REAR GD = GROOVED DISC
SAFETY AND FITTING INSTRUCTIONS
(1) ALWAYS FIT DISCS IN PAIRS
(2) NO WARRANTY ON SINGLE DISCS. WE ONLY ENTERTAIN WARRANTIES ON DISCS
SOLD AND FITTED IN PAIRS.
(3) ALWAYS REPLACE PADS AT DISC CHANGE. EBC KEVLAR BRAKE PADS ARE
KINDER TO DISCS, COST LESS THAN MOST BRANDS + OFFER SUPERB
BRAKING.
(4) ALWAYS CHECK RUNOUT IS LESS THAN 0.05mm AFTER ASSEMBLY. IF DISC
RUNOUT IS EXCESSIVE REMOVE + ROTATE BY ONE BOLT HOLE + CLEAN
HUB + RETEST. THIS IS CRITICAL TO THE DISC ASSEMBLY. FAILURE TO
OBSERVE THE ABOVE WILL RESULT IN THE DISC BEING RETURNED
AFTER 2-3 MONTHS OF USE.
(5) ALWAYS CLEAN RUST SCALE AND DIRT FROM HUB BEFORE FITTING.
(6) ALWAYS CLEAN DISCS WITH CONTACT CLEANER OR NON OIL BASE SOLVENT.
(7) ALWAYS IF PRACTICAL AVOID HARD BRAKING DURING THE FIRST 200 MILES AT
LEAST TO ALLOW DISC + PADS TO BED IN.
FAILURE TO OBSERVE THE ABOVE POINTS COULD LEAD TO UNBALANCED BRAKING,
VIBRATION AND/OR PREMATURE WEAR OF PADS.
EBC MATERIAL QUALITY - The Best!
● 100% European made castings
● 100% European Machined
● X-Ray inspection technology
● Dynamic balanced (vented types)
397