Landmark Snap In Installation Guide - CertainTeed

ePAPER READ

DOWNLOAD ePAPER

certainteed.com

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

START NOW

• Option 2: Screw cornice to ceiling panels and nail to a furring strip every 6

inches. Corners should be mitered.

Snap Bar

Wall

Snap-in Panel

Page 5 of 6

Vinyl Fence Installation Instructions - CertainTeed

Flintglas Ply Sheet Type 4 - CertainTeed

Form-A-Drain Protecting Your Foundation - CertainTeed

Mode d'installation des bardeaux de fente Rough ... - CertainTeed

C900/905 RJ™ & RJIB™ Technical Data Sheet - CertainTeed

Shingle Underlayments and Flintlastic® SA Roof ... - CertainTeed

Cedar Impressions ® Brochure - CertainTeed

Wall 1 3 Wall 2 4 7. Install Field Panels • Put on white gloves and hold the panel by its edges. • Force the panel’s crimped edges into the Tee Bar. • Slide the panels into position and level. 8. Cornice Installation (3 Options) • Option 1: Glue top of cornice to ceiling panels and nail (every 6”) it to a furring strip. • Corners should be mitered. Snap Bar Wall Glue Snap-in Panel Cornice Nail Page 4 of 6

• Option 2: Screw cornice to ceiling panels and nail to a furring strip every 6 inches. Corners should be mitered. Snap Bar Wall Snap-in Panel Page 5 of 6

Page 1 and 2: CertainTeed Ceilings Landmark Meta
Page 3: 5. Square the Grid System • Check

Landmark Snap In Installation Guide - CertainTeed

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?