Nozzle Loads, Piping Stresses, and the Effect of Piping on Equipment

More documents

Recommendations

Info

<strong>Nozzle</strong> <strong>Loads</strong> with Strut Fx = 335 lb Fy = -2560 lb Fz = -1410 lb Mx = -3126 ft-lb My = 1927 ft-lb Mz = -3216 ft-lb <strong>Nozzle</strong> <strong>Loads</strong> without Strut 20
API vs ANSI Pump Design API 610 ANSI B73.1 Mounting Centreline Foot Casing Thickness Basis Max discharge pressure ASME B16.5 Class 150 flange P/T rating Max Temperature By Manufacturer 260C Flanges Class 300 Class 150 21
Page 1 and 2: Nozzle Loa
Page 3 and 4: Introduction • As Mechanical Equi
Page 5 and 6: What are Equipment Nozzle</
Page 7 and 8: The Piping <strong
Page 9 and 10: Stress Engineering Tools • Stress
Page 11 and 12: Max ratio Same layout showing ASME
Page 13 and 14: Piping Support Typ
Page 15 and 16: Special Piping Sup
Page 17 and 18: Typical Piping Lay
Page 19: Strut to restrain the</stro
Page 23 and 24: API vs. ANSI Nozzle</strong
Page 25 and 26: API vs. ANSI Nozzle</strong
Page 27 and 28: Nozzle Load Issues
Page 29 and 30: High Temperature Barrel Pump • <s
Page 31 and 32: Very low thermal s
Page 33 and 34: Why is piping always bugging me? Co
Page 35 and 36: How can Nozzle <st
Page 37 and 38: Pumps rotated 180 deg. to reduce pi
Page 39 and 40: References • Pumps - API 610 10 t

Nozzle Loads, Piping Stresses, and the Effect of Piping on Equipment

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?