QNAP Turbo NAS User Manual - narf

More documents

Recommendations

Info

3.2 Network TC P/IP (i) IP A d d r e s s Configure the TCP/IP settings of the NAS on this page. Click the Edit button ( ) to edit the network settings. For the NAS with two LAN ports, users can connect both network interfaces to two different switches and configure the TCP/IP settings. The NAS will acquire two IP addresses which allow access from two different subnets. This is known as multi-IP settings*. When using the Finder to detect the NAS IP, the IP of the Ethernet 1 will be shown in LAN 1 only and the IP of the Ethernet 2 will be shown in LAN 2 only. To use port trunking mode for dual LAN connection, see section (iii). * TS-110, TS-119, TS-210, TS-219, TS-219P, TS-119P+, TS-219P+, TS-112, TS-212 provide one Giga LAN port only therefore do not support dual LAN configuration or port trunking. 36
On the TCP/IP Property page, configure the following settings: Ne two r k S p e e d Select the network transfer rate according to the network environment to which the NAS is connected. Select auto negotiation and the NAS will adjust the transfer rate automatically. Ob ta in the IP a d d r e s s s e tting s a uto m a tic a lly v ia DHCP If the network supports DHCP, select this option and the NAS will obtain the IP address and network settings automatically. U s e s ta tic IP a d d r e s s To use a static IP address for network connection, enter the IP address, subnet mask, and default gateway. 37
Page 1 and 2: QNAP Turbo NAS Software User Manual
Page 3 and 4: ...................................
Page 5 and 6: 1. Notice Thank you for choosing QN
Page 7 and 8: 1.2 Symbols in this document Warnin
Page 9 and 10: 2. Getting Started Hardware Install
Page 11 and 12: 4. Click “OK” to proceed. 5. Th
Page 13 and 14: 8. When finished, click “Return t
Page 15 and 16: Browse the CD-ROM and access the fo
Page 17 and 18: 2.3 Check System Status (LED and Al
Page 19 and 20: A la r m Buzze r (the a la r m b uz
Page 21 and 22: Mac Users 1. Choose “Go” > “C
Page 23 and 24: 3. Select to browse the NAS UI with
Page 25 and 26: After logging in the NAS, the home
Page 27 and 28: To use the services such as Web Fil
Page 29 and 30: De s tina tio n NA S 1-bay NAS Dis
Page 31 and 32: 3. System Administration General Se
Page 33 and 34: Da te a nd Tim e Adjust the date, t
Page 35: La ngua ge Select the language the
Page 40 and 41: A d v a nc e d Op tio ns A Virtual
Page 42 and 43: 4. The Ethernet interfaces will be
Page 44 and 45: Balance-alb (Adaptive Load Balancin
Page 46 and 47: Wi- F i To connect the NAS to a Wi-
Page 48 and 49: Click “Rescan” to search for av
Page 50 and 51: 2 . Ma nua lly c o nne c t to a W i
Page 52 and 53: Click “Finish” after the NAS ha
Page 54 and 55: DDNS To allow remote access to the
Page 56 and 57: To use this function, select the op
Page 58 and 59: The available network interfaces on
Page 60 and 61: Ba s ic s y s te m r e s e t (3 s e
Page 62 and 63: E na b le wa r ning a le r t fo r r
Page 64 and 65: Ne twork Acce ss Prote ction The ne
Page 66 and 67: 3.6 Notification C onfigure SMTP Se
Page 68 and 69: 5. Go to “Notification” > “Al
Page 70 and 71: C onfigure SMS Se rv e r Configure
Page 73 and 74: 3.7 Power Management You can restar
Page 75 and 76: 3.8 Network Recycle Bin Ne two r k
Page 77 and 78: 3.10 System Logs Sy ste m Ev e nt L
Page 79 and 80: Archive logs: Turn on this option t
Page 81 and 82: Sy slog Syslog is a standard for fo
Page 83 and 84: Upda te F irm wa re by F inde r The
Page 85 and 86: Liv e Upda te Select “Enable live
Page 87 and 88:
4. Disk Management Volume Managemen
Page 89 and 90:
S ingle D isk Volume Each hard driv
Page 91 and 92:
4.2 RAID Management *Online RAID ca
Page 93 and 94:
Op e r a tio n p r o c e d ure In
Page 95 and 96:
After plugging in the hard drive, w
Page 97 and 98:
The process may take from hours to
Page 99 and 100:
Go to “Disk Management” > “Vo
Page 101 and 102:
Go to “Disk Management” > “RA
Page 103 and 104:
When migration is in process, the r
Page 105 and 106:
Use Online RAID C a pa city Ex pa n
Page 107 and 108:
C onfigure Spa re Driv e You can ad
Page 109 and 110:
Re cov e r (RAID Re cov e ry ) RAID
Page 111 and 112:
Se t/C a nce l Globa l Spa re A glo
Page 113 and 114:
RAID 6 * 6 1 Add hard drive member
Page 115 and 116:
RAID 1 * 2 1 Online RAID level migr
Page 117 and 118:
4.3 Hard Disk S.M.A.R.T. Monitor th
Page 119 and 120:
Ho w to us e the d a ta e nc r y p
Page 121 and 122:
Cr e a te a ne w e nc r y p te d d
Page 123 and 124:
Ve r ify tha t d is k v o lum e is
Page 125 and 126:
E nc r y p tio n k e y m a na g e m
Page 127 and 128:
4.5 iSCSI Portal Management 127 Tar
Page 129 and 130:
3. Enter the CHAP authentication se
Page 131 and 132:
iSCSI Quick Configuration Wizard Th
Page 133 and 134:
5. Enter the target name and target
Page 135 and 136:
7. Create an iSCSI LUN. An iSCSI LU
Page 137 and 138:
10. The target and LUN are shown on
Page 139 and 140:
3. Select the allocation method. En
Page 141 and 142:
6. When the LUN has been created, c
Page 143 and 144:
Butto n De s c r ip tio n Deactivat
Page 145 and 146:
3. Select the target to map the LUN
Page 147 and 148:
2. Use the slide bar to specify the
Page 149 and 150:
The available iSCSI targets and the
Page 151 and 152:
After the target has been connected
Page 153 and 154:
4.5.2.2 Connect to the iSCSI target
Page 155 and 156:
Follow the screen instructions and
Page 157 and 158:
You can configure the connection pr
Page 159 and 160:
The first time you logon to the iSC
Page 161 and 162:
Enter the following command to crea
Page 163 and 164:
Enter the policy name, the initiato
Page 165 and 166:
Hint: How do I find the initiator I
Page 167 and 168:
2. Select “Back up an iSCSI LUN
Page 169 and 170:
5. Enter a name of the backup LUN i
Page 171 and 172:
7. The settings will be shown. Ente
Page 173 and 174:
Restore an iSCSI LUN 1. To restore
Page 175 and 176:
5. Select the destination. Overwrit
Page 177 and 178:
8. The restore job will be executed
Page 179 and 180:
3. Select an iSCSI LUN on the NAS.
Page 181 and 182:
7. Click “Finish” to exit. 8. T
Page 183 and 184:
Manage LUN Backup/Restore/Snapshot
Page 185 and 186:
4.6 Virtual Disk You can use this f
Page 187 and 188:
Enter a name for the virtual disk.
Page 189 and 190:
Ic o n De s c r ip tio n (Edit) To
Page 191 and 192:
191
Page 193 and 194:
3. Go to “Access Right Management
Page 195 and 196:
2. Read the introduction of the wiz
Page 197 and 198:
4. Select a domain controller from
Page 199 and 200:
Windows 2003 The AD server name and
Page 201 and 202:
Windows 7 If you are using a Window
Page 203 and 204:
Verify the settings To verify that
Page 205 and 206:
LDAP Server Host: The host name or
Page 207 and 208:
If Microsoft Networking is enabled
Page 209 and 210:
T e c hnic a l r e q uir e m e nts
Page 211 and 212:
5.2 Users The NAS has created the f
Page 213 and 214:
Create a User To create a user on t
Page 215 and 216:
3. Enter the name prefix, e.g. test
Page 217 and 218:
5. Specify the folder settings. 6.
Page 219 and 220:
8. Check that the network shares ha
Page 221 and 222:
3. Click “Next” to download and
Page 223 and 224:
3. Click “Browse” and select th
Page 225 and 226:
The NAS supports importing user acc
Page 227 and 228:
5.3 User Groups A user group is a c
Page 229 and 230:
1. To create a network share, click
Page 231 and 232:
4. Select the way you want to speci
Page 233 and 234:
6. Confirm the settings and click
Page 235 and 236:
To delete a network share, select t
Page 237 and 238:
Folder Permissions Configure folder
Page 239 and 240:
Click “+ Add” to select more us
Page 241 and 242:
Subfolder Permissions The NAS suppo
Page 243 and 244:
No te : If you have specified “de
Page 245 and 246:
Only the owner can delete the conte
Page 247 and 248:
Microsoft Networking Host Access Co
Page 249 and 250:
ISO Sha re F olde rs You can mount
Page 251 and 252:
5. Confirm the settings and click
Page 253 and 254:
F olde r Aggre ga tion You can aggr
Page 255 and 256:
4. Click (Link Configuration) and e
Page 257 and 258:
Adv a nce d Options To configure su
Page 259 and 260:
6. Network Services Microsoft Netwo
Page 261 and 262:
S ta nd a lo ne S e r v e r Use loc
Page 263 and 264:
Na m e r e s o lutio n p r io r ity
Page 265 and 266:
You can use the Finder to connect t
Page 267 and 268:
6.3 NFS Service To connect to the N
Page 269 and 270:
Co nne c t to the NA S b y NF S On
Page 271 and 272:
U nic o d e S up p o r t Turn on or
Page 273 and 274:
6.6 SNMP Settings Enable SNMP (Simp
Page 275 and 276:
6.7 Web Server The NAS supports Web
Page 277 and 278:
We bDAV WebDAV (Web-based Distribut
Page 279 and 280:
3. Select “Choose another network
Page 281 and 282:
6. Type a name for this network pla
Page 283 and 284:
8. Now you can connect to this fold
Page 285 and 286:
2. Click “Connect to a Web site t
Page 287 and 288:
4. Enter the URL of your NAS with t
Page 289 and 290:
7. The Web folder has been successf
Page 291 and 292:
9. You can connect to the folder th
Page 293 and 294:
3. You can connect to the folder th
Page 295 and 296:
2. Select “WebDAV (HTTP)” or
Page 297 and 298:
My S QL Ma na g e m e nt Install ph
Page 299 and 300:
Follow the steps below to use virtu
Page 301 and 302:
8. Create a folder for each website
Page 303 and 304:
Bonjour By broadcasting the network
Page 305 and 306:
7.1 Web File Manager To connect to
Page 307 and 308:
Upload file No te : The maximum siz
Page 309 and 310:
Extract files i. To extract a zippe
Page 311 and 312:
Mount ISO Shares To mount an ISO fi
Page 313 and 314:
File/Folder Level Permissions You c
Page 315 and 316:
If a folder is selected, you can ch
Page 317 and 318:
Select the users and user groups an
Page 319 and 320:
You can also define the file and fo
Page 321 and 322:
7.2 Multimedia Station Multimedia S
Page 323 and 324:
4. When the page of Multimedia Stat
Page 325 and 326:
Me dia C e nte r The folders and mu
Page 327 and 328:
You can browse the files in detaile
Page 329 and 330:
View image files When viewing an im
Page 331 and 332:
Select the playlist and click “Sa
Page 333 and 334:
To copy the files from other locati
Page 335 and 336:
Manage album To manage an album (fo
Page 337 and 338:
Set album cover To set an image fil
Page 339 and 340:
Slide Show Click to view multiple i
Page 341 and 342:
Select the image files to publish.
Page 343 and 344:
Play video The NAS supports playing
Page 345 and 346:
My Juke box You can create playlist
Page 347 and 348:
Enter the user information. The use
Page 349 and 350:
Playlist Editor To create a playlis
Page 351 and 352:
The name of a photo frame must be 1
Page 353 and 354:
7.2.1 QMobile QMobile is an applica
Page 355 and 356:
Get the download link automatically
Page 357 and 358:
Co nfig ure the NA S s e tting s o
Page 359 and 360:
No te : 1. For iPhone users This fe
Page 361 and 362:
A d d S e r v e r Ma nua lly Enter
Page 363 and 364:
U s e QMo b ile to m a na g e y o u
Page 365 and 366:
Music view Video view 365
Page 367 and 368:
Photo Source: Choose the photos fro
Page 369 and 370:
3. My Favorites You may download th
Page 371 and 372:
Downloaded files will be shown in
Page 373 and 374:
Click “Add” to create a Playlis
Page 375 and 376:
You can play the playlists created
Page 377 and 378:
7.3 Download Station The NAS suppor
Page 379 and 380:
Global Settings Select continuous d
Page 381 and 382:
2. Directories Select the default f
Page 383 and 384:
HT T P, F T P, Ra p id S ha r e S e
Page 385 and 386:
4. Account You can save the login i
Page 387 and 388:
BT Download To download a file by B
Page 389 and 390:
RSS Feed You can subscribe to RSS f
Page 391 and 392:
To manage the RSS feeds subscriptio
Page 393 and 394:
HTTP, FTP, RapidShare Download To a
Page 395 and 396:
The common reasons for slow BT down
Page 397 and 398:
2. Follow the instructions to insta
Page 399 and 400:
7.4 Surveillance Station You monito
Page 401 and 402:
S e t up the IP c a m e r a s In th
Page 403 and 404:
After you have added the network ca
Page 405 and 406:
Go to the configuration page of you
Page 407 and 408:
7.5 iTunes Server No te : This feat
Page 409 and 410:
Click the triangle icon next to the
Page 411 and 412:
A b o ut U PnP Universal Plug and P
Page 413 and 414:
Database Maintenance Reset root pas
Page 415 and 416:
Before installing the QPKG package,
Page 417 and 418:
E m a il No tific a tio n: The NAS
Page 419 and 420:
3. The filters will be shown on the
Page 421 and 422:
7.10 RADIUS Server The NAS can be c
Page 423 and 424:
3. Create RADIUS users and their pa
Page 425 and 426:
7.11 Backup Server Rsy nc Se rv e r
Page 427 and 428:
You can specify the IP addresses or
Page 429 and 430:
7.12 Antivirus Sta tus Use the anti
Page 431 and 432:
Scan Jobs The NAS supports manual a
Page 433 and 434:
5. Select to scan all the files in
Page 435 and 436:
7. Specify the actions to take when
Page 437 and 438:
Re ports View or download the repor
Page 439 and 440:
7.13 TFTP Server Configure the NAS
Page 441 and 442:
2. Specify the server type, NAS or
Page 443 and 444:
6. Select to replicate the data imm
Page 445 and 446:
Ic o n De s c r ip tio n Start a re
Page 447 and 448:
RTRR Re plication Real-time Remote
Page 449 and 450:
3. Select the sync locations. Make
Page 451 and 452:
Re m o te r e p lic a tio n to NA S
Page 453 and 454:
6. Select “Add More Folder Pairs
Page 455 and 456:
8. To configure synchronization pol
Page 457 and 458:
10. Enter a job name. Click “Next
Page 459 and 460:
Ic o n De s c r ip tio n Enable con
Page 461 and 462:
Specify the replication policy in
Page 463 and 464:
You can view the job logs or downlo
Page 465 and 466:
8.2 Cloud Backup Am a zon S3 Amazon
Page 467 and 468:
Ele pha ntDriv e To use ElephantDri
Page 469 and 470:
Login your ElephantDrive account. Y
Page 471 and 472:
To use this function, follow the st
Page 473 and 474:
3. Enter the user name and password
Page 475 and 476:
8.4 External Drive The NAS supports
Page 477 and 478:
4. Select the backup locations. a.
Page 479 and 480:
6. Choose between real-time and sch
Page 481 and 482:
8. Create filters for the backup jo
Page 483 and 484:
11. Click “Finish” to exit the
Page 485 and 486:
To disable the backup schedule of a
Page 487 and 488:
Specify the backup policy in “Pol
Page 489 and 490:
3. Go to “Job Logs” and click
Page 491 and 492:
491
Page 493 and 494:
9. External Device External Storage
Page 495 and 496:
E nc r y p tio n m a na g e m e nt
Page 497 and 498:
3. Click “Finish” to lock the d
Page 499 and 500:
3. Enter the encryption password or
Page 501 and 502:
3. Select to change the encryption
Page 503 and 504:
9.2 USB Printer The NAS supports ne
Page 505 and 506:
E nte r IP a d d r e s s e s o r d
Page 507 and 508:
2. Click “Add a printer”. 3. In
Page 509 and 510:
6. The wizard will prompt you for t
Page 511 and 512:
The following description applies t
Page 513 and 514:
9.2.2 Windows XP Users Follow the s
Page 515 and 516:
9.2.3 Mac OS 10.6 If you are using
Page 517 and 518:
5. Additional options may be availa
Page 519 and 520:
3. Go to “Print & Fax” on your
Page 521 and 522:
7. Select the printer driver. 521
Page 523 and 524:
9.2.5 Mac OS 10.4 If you are using
Page 525 and 526:
4. Press and hold the “alt” key
Page 527 and 528:
6. The printer appears on the print
Page 529 and 530:
3. Click “Network Printer”, and
Page 531 and 532:
7. Choose the correct printer model
Page 533 and 534:
9.3 UPS Settings By enabling the UP
Page 535 and 536:
Network master mode A network UPS m
Page 537 and 538:
537
Page 539 and 540:
10.1 MyCloudNAS Wizard The first ti
Page 541 and 542:
3. Select the ports to open on the
Page 543 and 544:
5. A summary will be shown. You can
Page 545 and 546:
7. Click the service icons and logi
Page 547 and 548:
10.2 Configure MyCloudNAS Enable My
Page 549 and 550:
Set MyCloudNAS Access Code: Enter a
Page 551 and 552:
10.3 Auto Router Configuration In
Page 553 and 554:
Select the NAS services to be allow
Page 555 and 556:
11.2 System Service You can view th
Page 557 and 558:
Disk Usage: This tab shows the disk
Page 559 and 560:
Process: This tab shows information
Page 561 and 562:
For example, when you turn on the N
Page 563 and 564:
Vie w sy ste m inform a tion by the
Page 565 and 566:
S y s te m This section shows the s
Page 567 and 568:
13. NetBak Replicator NetBak Replic
Page 569 and 570:
Use Ne tBak Re plicator 1. Before u
Page 571 and 572:
De s c r ip tio n o f the b utto ns
Page 573 and 574:
S ta r t When you have selected the
Page 575 and 576:
575
Page 577 and 578:
577
Page 579 and 580:
Initia liz e Co nfig ura tio n Clic
Page 581 and 582:
Options: Select the behaviour of Ne
Page 583 and 584:
14. Connect to QNAP NAS from the In
Page 585 and 586:
3. Complete the form to create a fr
Page 587 and 588:
6. Click “Confirm Account” and
Page 589 and 590:
Co nfig ure DDNS s e r v ic e o n Q
Page 591 and 592:
Port F orwa rding If your NAS is lo
Page 593 and 594:
Fill out your personal information
Page 595 and 596:
While still logged in with Clickate
Page 597 and 598:
2. S e t the S MS C s e tting s a n
Page 599 and 600:
Se t up Em a il Ale rt Go to “Sys
Page 601 and 602:
5. Go to “Notification” > “Al
Page 603 and 604:
16. Set up UPnP Media Server for Me
Page 605 and 606:
S e t up T wo nk y Me d ia S e r v
Page 607 and 608:
S e t up the c o nne c tio n o f m
Page 609 and 610:
Turn on the TV that is connected to
Page 611 and 612:
If your TV does not provide an HDMI
Page 613 and 614:
Next go to “Application Servers
Page 615 and 616:
S ta r t the p hp BB3 we b - b a s
Page 617 and 618:
The installation compatibility page
Page 619 and 620:
You should see “Tests passed” a
Page 621 and 622:
phpBB3 creates all the database tab
Page 623 and 624:
This is the front page of your fres
Page 625 and 626:
18.1 System Restart/Shutdown Follow
Page 627 and 628:
18.2 System Temperature Protection
Page 629 and 630:
When the RAID configuration is RAID
Page 631 and 632:
versions of the GPL, as needed to p
Page 633 and 634:
espect to the covered work, and you
Page 635 and 636:
ecipient, or for the User Product i
Page 637 and 638:
importing the Program or any portio
Page 639:
16. Limitation of Liability. IN NO
show all

QNAP Turbo NAS User Manual - narf

Create successful ePaper yourself

Delete template?

Save as template?