META Order Catalogue

META MINI-RACK ® Wide Span Racking
Wide Span Racking for drum racking
Special Racking
consisting of disassembled frame each with 2 pairs of beams
the beam pairs can be adjusted in increments of 50 mm
suitable for indoor installation only
manufacturer's declaration of conformity as described in Building
Regulations List A Part 1, DIBt
tray capacity 230 litres
tray construction: 3 mm steel sheet, hot-dip galvanised as defined in
DIN EN ISO 1461, with support feet, ground clearance 100 mm
suitable for: – combustible fluids with the F / F+ hazard symbols
– water-polluting fluids of WGK class 1-3
– maximum density of fluids 1.9 kg/l
scope of supply of starter bay: 2 frames (disassembled), 2 beam
pairs, 4 drum holders, 1 oil collecting pan, 1 can holder
scope of supply of add-on bay: 1 frame (disassembled), 2 pairs of
beams, 4 drum holders, 1 oil collecting pan, 1 can holder
1 2
META MINI-RACK ® drum racking, galvanised · for 4 drums of 200 litres each, galvanised surface, with oil spillage tray
Height
mm
2200
Width
mm
1400
Depth
mm
800
Number
of shelves
2
Bay load
kg
1200
with collecting pan 1200 x 1200 x 285 mm
Starter bay
Add-on bay
Item No.
68534
€ Item No. €
68535
1 Drum holder
2 Can holder
Description
Item No. € Description
Item No. €
galvanised, for 800 mm depth
42613
galvanised, can be disassembled
68528
Planning dimensions & load data
Starter bay: Nominal width + 107 mm
Add-on bay: Nominal width + 51 mm
Note on safety:
Racking with a height to depth ratio of more than 5: 1 should be
fixed to the floor to prevent tilting (for floor anchoring, see Page 102).
Shelf/bay loads apply to evenly distributed loads.
Bay load data apply to rows of shelves in 4 or more bays.
80
on stock
two weeks ex works
on request