Caffe Bellissimo - Sunbeam
Caffe Bellissimo - Sunbeam
Caffe Bellissimo - Sunbeam
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Troubleshooting continued<br />
Display<br />
Espresso/coffee<br />
not hot enough<br />
Espresso/coffee too weak.<br />
No milk froth or milk not<br />
dispensed<br />
Low quality froth.<br />
Cause<br />
Cups too cold<br />
Not enough pre-ground<br />
coffee used<br />
Milk system not correctly<br />
connected.<br />
Milk tube bent<br />
Milk container is empty<br />
Milk too warm or old<br />
Solution<br />
Warm up cups with hot<br />
water<br />
Increase the coffee<br />
temperature: see pg 25<br />
Setting and storing the<br />
coffee temperature<br />
Measure coffee properly:<br />
top up with 1 level<br />
measuring spoon (max.8g)<br />
of pre-ground coffee<br />
Set ground coffee quantity<br />
higher<br />
Vary grinding fineness<br />
Try a different coffee sort.<br />
Check milk system<br />
connection: see section<br />
pg 10 Connecting the<br />
milk system<br />
Straighten milk tube<br />
Fill milk container<br />
Use fresh, cold milk.<br />
Very loud noise during<br />
grinding<br />
Froth nozzle is clogged.<br />
Milk system is not clean.<br />
Grinding mechanism<br />
clogged by foreign matter<br />
Clean froth nozzle: see pg<br />
32 Cleaning the nozzle of<br />
the milk frother<br />
Clean milk system: see pg<br />
35 Milk system cleaning<br />
program.<br />
Contact our Customer<br />
Service Hotline to locate<br />
your nearest service agent<br />
representative on<br />
1800 881 861<br />
44