CompactPCI J1 - Ekf
CompactPCI J1 - Ekf
CompactPCI J1 - Ekf
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CG2-SHANTY • <strong>CompactPCI</strong> GPS Receiver/Clock<br />
C The CG2-SHANTY can be used to synchronize external events with the UTC (Universal<br />
Time Coordinated). Two single row 3-pin headers (JUTC1 & JUTC3) are provided optional<br />
to route the time signal to the UART controller or directly to the INTP pin on the<br />
<strong>CompactPCI</strong> backplane (<strong>J1</strong> D4).<br />
removed<br />
set 1-2<br />
set 2-3<br />
removed<br />
set 1-2<br />
set 2-3<br />
removed<br />
JUTC1<br />
1 2 3<br />
1 2 3<br />
1 2 3<br />
(optional)<br />
JUTC3<br />
1 2 3<br />
1 2 3<br />
1 2 3<br />
(optional)<br />
JMP_COM<br />
not connected<br />
10kHz to UART<br />
1Hz to UART<br />
not connected<br />
10kHz to INTP<br />
1Hz to INTP<br />
C Optional, one single row 2-pin header (JMP_COM) is provided to enable/disable the<br />
onboard RS232 transceiver.<br />
(optional)<br />
Transceiver disabled<br />
set Transceiver enabled<br />
- 14 -<br />
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany<br />
Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.com