DESICCANT AIR DRYER - Harbor Freight Tools
DESICCANT AIR DRYER - Harbor Freight Tools
DESICCANT AIR DRYER - Harbor Freight Tools
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
9.<br />
10.<br />
increase the usable life of the desiccant,<br />
but are not required.<br />
This product is not a toy. Keep it out of<br />
reach of children.<br />
The warnings, precautions, and<br />
instructions discussed in this instruction<br />
manual cannot cover all possible<br />
conditions and situations that may occur.<br />
It must be understood by the operator<br />
that common sense and caution are<br />
factors which cannot be built into this<br />
product, but must be supplied by the<br />
operator.<br />
Save these<br />
instructions.<br />
Specifications<br />
Maximum Air Pressure<br />
Flow Capacity<br />
Maximum Input Air<br />
Temperature<br />
Air Connection<br />
Size<br />
175 PSI<br />
17 CFM<br />
100° Fahrenheit<br />
1/2”-14 NPT<br />
Mounting Holes 1/4” Diameter (Qty. 4)<br />
Replacement Silica<br />
Desiccant<br />
Weight<br />
Order Sku 97924 (2.2 lb.)<br />
17.6 lb.<br />
Unpacking<br />
Installation Instructions<br />
1.<br />
Read the entire Important<br />
Safety Information section at<br />
the beginning of this manual<br />
including all text under<br />
subheadings therein before set up<br />
or use of this product.<br />
To prevent<br />
serious injury<br />
from accidental<br />
operation:<br />
Turn off the compressed air<br />
supply source, and release any<br />
compressed air from the tool<br />
before performing any set up and<br />
operating procedures.<br />
WARNING<br />
Prior to use, the Desiccant Air Dryer<br />
must be firmly mounted to a solid, level<br />
wall surface capable of supporting<br />
the weight of the Dryer and all other<br />
additional tools and accessories.<br />
2. IMPORTANT: Mount the Air Dryer<br />
vertically with the Ball Valve (6)<br />
downwards and as far as possible (at<br />
least 25 feet) from the air supply to allow<br />
cooling of the air. The temperature of the<br />
air should not exceed 100° Fahrenheit at<br />
the inlet of the Air Dryer. (See Figure A.)<br />
When unpacking, check to make sure<br />
that the item is intact and undamaged. If<br />
any parts are missing or broken, please call<br />
<strong>Harbor</strong> <strong>Freight</strong> <strong>Tools</strong> at the number shown on<br />
the cover of this manual as soon as possible.<br />
Note: For additional information regarding the<br />
parts listed in the following pages, refer<br />
to the Assembly Diagram near the end of<br />
this manual.<br />
Page 4 For technical questions, please call 1-800-444-3353. SKU 97686<br />
REV 10d
Change language