ultrasonic stain cleaner - Harbor Freight Tools

More documents

Recommendations

Info

Replacing the Batteries Figure 1 Main Body (1) Back Cover (3) Battery Cover (5) 1. 2. 3. 4. Unscrew and remove the Back Cover (3) from the Main Body (1). Fold up the Battery Cover (5) and remove the used batteries-see Figure 1. Insert the new batteries according to the polarity markings in the battery compartment. Fold down the Battery Cover (5). Thread the Back Cover (3) back onto the Main Body (1). operation 1. 2. 3. 4. 5. Before using the Ultrasonic Stain Cleaner, read and adhere to Step 9 on Page 3. WARNING! Do not press the Ultrasonic Cleaner’s “ON” button while making any adjustments to it. Pour a small amount (about 1 cm high) of liquid (water or a mild soap) into a small bowl or container (not included). Using mild soap will improve the cleaning effect. Place the portion of the garment or item to be cleaned into the liquid. Make certain that the item to be cleaned will not be damaged by exposing or submerging it in liquid. Make certain that the object being submerged does not have electrical components as this could result in damage and injury. Press and hold down the “ON” button (6) until the LED light indicates the Ultrasonic Cleaner is activated. Continue to hold down the “ON” button while operating the Ultrasonic Cleaner. 6. 7. Keep the portion of the garment to be cleaned under the liquid surface, and place the Transducer (9) (located at the front of the Ultrasonic Cleaner) into the liquid and move it close to the part of the fabric to be cleaned. Do not actually touch the item with the Ultrasonic Stain Cleaner. Move it back and forth over the portion of the item that needs cleaning until it is clean. When you are finished, release the “ON” button (6) to turn off the Ultrasonic Stain Cleaner. SKU 96474 For technical questions, please call 1-800-444-3353. REV 07h Page
inspection, maintenance and cleaning 1. 2. 3. 4. 5. 6. Make sure the Ultrasonic Cleaner’s “ON” button is not pressed and the batteries are removed before performing any inspection, maintenance or cleaning procedures. Before each use, inspect the general condition of the Ultrasonic Cleaner. Check for cracks or other damage. If abnormal noise or vibration occurs have the problem corrected before further use. For objects that may be difficult to clean, immerse them in water before cleaning. Do not use damaged equipment. Use only a clean cloth and mild detergent to clean the body of the Ultrasonic Cleaner. Do not use abrasives or solvents. Storage: When storing, remove batteries if the Ultrasonic Cleaner will not be used for a long period of time. parts list Part Description Q’ty 1 Main Body 1 2 Front Cover 1 3 Back Cover 1 4 PCB Support 1 5 Battery Cover 1 6 “ON” Button 1 7 Rear Waterproofing Gasket 1 Part Description Q’ty 8 Front Waterproofing Gasket 1 9 Transducer 1 10 PCB 1 11 Battery 4 12 Panel 1 13 Pin 1 14 LED light 1 SKU 96474 For technical questions, please call 1-800-444-3353. REV 07h Page
Page 1 and 2: ultrasonic stain cleaner Model 9647
Page 3: 7. 8. 9. 10. 11. 12. 13. 14. 15. Us

ultrasonic stain cleaner - Harbor Freight Tools

Create successful ePaper yourself

Delete template?

Save as template?