Moultrie Panoramic 150 Manual - Trail Camera

More documents

Recommendations

Info

I CAMERA OVERVIEW (cont.) VII CAMERA SPECIFICATIONS ON / OFF / AIM Used for turning On, turning Off, or IR testing. When AIM is ON, the red AIM LED light on the front of the camera will illuminate. When Aim is ON and the PIR sensor detects motion, the red LED on the front of the camera will come on for 2 seconds and then shut off. As you walk towards center the LED will appear brighter. MODE BUTTON The Mode Button selects Camera Setup or Main Screen. When camera mode is selected, the UP and DOWN buttons navigate through the menu options. The Mode Button is also used to wake-up the camera and turn on the display when the camera is in power saving (or sleep) mode. ENTER, UP/DOWN and LEFT/RIGHT BUTTONS The ENTER button selects the item to be changed. The UP/DOWN and LEFT/RIGHT buttons are used to step through the menu options. Pressing the ENTER button again, selects the option indicated on the display. The ENTER button is also used to manually take a picture. BATTERY COMPARTMENT The camera is powered by six (6) C-cell alkaline batteries. Slide the Unlock switch to the front and grab the small handle under the switch to slide-out the battery compartment tray. SD CARD SLOT Accepts up to a 32GB SD Card for photo and video storage. NOTE: An SD Card must be installed for the camera to operate (sold separately). USB PORT Download still pictures and video onto your computer by connecting a mini-USB cable (sold separately) to the USB port. EXTERNAL POWER PORT Accepts the Moultrie PowerPanel or Moultrie Battery Box accessories (sold separately) only. Refer to www.moultriefeeders.com for more information. NOTE: The use of any other power source will void your warranty and possibly harm your camera. Photo Resolutions (Single) 0.5 MP 854 x 480 2.0 MP 1920 x 1080 4.0 MP 2560 x 1440 6.0 MP 3340 x 1872 8.0 MP 3840 x 2160 Photo Resolutions (Panoramic) 0.5 MP 2544 x 480 2.0 MP 3360 x 630 4.0 MP 4800 x 900 6.0 MP 5760 x 1080 8.0 MP 6384 x 1197 Video Resolutions VGA 848 x 480 @ 24fps HD 1280 x 720 @ 24fps Approximate photos stored 4GB SD card 0.5 MP 23,000 2.0 MP 4,500 4.0 MP 3,600 8.0 MP 2,500 Approximate video time stored 4GB SD card HD 45 minutes VGA 75 minutes SD Memory Card 32 GB Max Optical Field of View 150 degrees Batteries 6 Alkaline C-cells Approximate Detection Range 40 +/-5 feet Page 2 P-150 Digital Game Camera P-150 Digital Game Camera Page 11
VI B PLOTSTALKER ACTIVITY SEARCH Viewing Pictures on Computer via USB 1. Plug ACTIVITY USB cable (sold SEARCH separately) into the USB port on your Windows 7/Vista/XP computer. The Search Feature will scan through your photos and automatically 2. Plug look other for end changes of USB cable in regions into the that camera’s you USB identify port. in Setup. 3. To access JPG pictures and AVI movie files, navigate to “My Computer” and double click the In search mode, the PlotStalker software scans through the .mlt photo file, stops “Moultrie CAM” drive. Picture files will be stored in theDCIM/100MFCAM directory; video files on a photo when changes are found in your identified region, and then highlights are located in the DCIM directory. VI VI the ADVANCED changes in blue. You can INFORMATION click anywhere in the video viewing (cont.) area to remove 4. To exit the USB blue mode, highlights. follow Windows’ instructions for properly disconnecting a removable drive and then unplug. ACTIVITY SEARCH SETUP Click INFORMATION the INFORMATION Settings button ON to PICTURE activate ON PICTURE Information the Region on and Picture Sensitivity settings for The the info Activity The strip info Search below strip will below appear will at the appear bottom at of the the bottom photo/video: of the photo/video: The info strip below will appear at the bottom of the photo/video: Temperature Temp. Moon Date Date Time Time Camera Camera Name Temp. Phase Moon Date Time Name Camera Name DEFINE SEARCH REGION Provides the ability to search for Moon changes Phase in the photo in a specific The region icons Moon rather for the Phase than moon the phase entire are photo. as follows: Moon Phase The icons for the moon phase are as follows: The icons for the moon phase are as follows: 1 2 3 ADVANCED INFORMATION ADVANCED INFORMATION (cont.) 75 o F 01/01/13 12:00 AM MOULTRIECAM Click on the Set Motion Search Area Button. Use the mouse to select and drag the red outline around the area you want to search 01 for 1movement. 2 23 This 3allows 4 you 45 to focus 56 on a very 67 precise 78 area if required. New Waxing First Waxing Full Waning Last Waning Moon Crescet Crescent Quarter Gibbons Moon Gibbons Quarter Crescet Crescent Click OK button on the Settings Popup window to confirm your settings and exit the menu. SENSITIVITY 1 Set to High, Medium or Low - This sets the level of pixel change the program will detect. Note; a pixel change will occur with a color, intensity, lighting or movement so this setting is critical to obtain the desired results. DEFAULT SETTINGS 1 Click on Default button to return to the default values for Search Area and Sensitivity settings. GPS Latitude - 000.000000 N GPS Longitude - 000.000000 W II STEP 1 Slide the UNLOCK switch on the bottom of Camera and use the knob to pull the slide-out Battery Tray. Install six (6) C-cell alkaline batteries with polarities as indicated in the Battery Slide Tray. the UNLOCK Re-install the switch Battery on Tray the and bottom insert of your Camera SD card. and use the knob to pull the slide-out Battery Tray. Install or eight(8) AA size alkaline or lithium batteries STEP 2 Thread the provided Mounting Strap through the Eyelets on the back of the camera and with polarities as indicated in the Battery Tray. Re-install the Battery Tray. secure to a tree or pole approximately 36” from the ground as shown. Thread the provided Mounting Strap through the Eyelets on the back of the STEP 3 Turn Camera on by sliding ON/OFF/AIM switch to the ON position. camera and secure to a tree or pole approximately 36" from the ground as shown. STEP 4 Press the MODE button one time to get to the Main Selection Screen, Turn select Camera Setup. on Set by Time sliding and ON/OFF/IR Date by pressing TEST ENTER, switch using to the UP/DOWN ON position. to adjust selected field, LEFT/RIGHT to move Eyelet to Press the next the field MODE and ENTER button when one done. time to get to the STEP 5 Press Camera MODE Setup button Menu. until MENU Set Time SELECTION and Date screen by is pressing displayed. ENTER, Use using the UP/DOWN buttons to adjust until the selected MAIN field, SCREEN LEFT/RIGHT option is highlighted to move to yellow. the next Press field ENTER. and ENTER STEP 6 Switch when camera done. to AIM. Aim camera using motion detection Press MODE to determine button target until area. MENU Walk SELECTION in front of the camera at the desired distance and the camera LED will Mounting screen is displayed. Use the UP/DOWN buttons flash showing the covered area. Strap until the MAIN SCREEN option is highlighted STEP 7 Switch yellow. camera Press to ON.Your ENTER. camera will now automatically take pictures whenever an animal is detected in range, based Your on Camera the default will settings now automatically below. take pictures whenever an animal is detected in range -based on the default settings below. DEFAULT SETTINGS III QUICK START INSTRUCTIONS Capture Mode Photo Quality Photo Delay after each photo is taken Multi Shot Count Video Resolution Video Length Camera Name Temperature Info Strip printed on photos Time Lapse Frequency Time Lapse Duration GPS Latitude GPS Longitude Delete All? Default Setting Security Code 00000 PANORAMIC Capture Mode 4.0 MP TRAIL CAM (Still) Photo Quality 2.0 MP 15 SECONDS Photo Delay after each photo is taken 5 SEC OFF Motion Freeze ON VGA Multi Shot Count OFF 10 SECONDS Video Resolution VGA MOULTRIECA M Video Length 5 SEC FAHRENHEIT Video Audio ON ON Camera Name MOULTRIECAM 30 SECONDS Temperature FAHRENHEIT 3 HOUR Info Strip printed on photos ON 000.000000 N Plot Frequency 15 SECONDS 000.000000 E Plot Duration 3 HOUR GPS Longitude & Latitude: Default Setting NO Delete All? NO Security Code 00000 NO 000.000000 N / 000.000000 W NO Page Page 10 14 P-150 Digital Camera Page 3 P-150 PlotStalker Digital Software Game Camera M-880 GameSpy Digital Camera Page 3
Page 1: Important Battery lnformation - Onl
Page 5 and 6: V SETUP AND PROGRAMMING (cont) V SE

Moultrie Panoramic 150 Manual - Trail Camera

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?