The 2012 catalogue - Triax

Multiplex for converting ASI transport streams
Multiplexing from 5 ASI transport streams to IPTV
HADA 5100 SPTS
This cassette converts 5 ASI signals to IPTV.
Either SPTS or MPTS is converted via the LAN interface
dependent on the ASI data stream.
The data stream (SPTS / MPTS) includes every service ID
which is necessary for the reception with an IPTV receiver.
The firmware update of this cassette can be done via the
RS-232 interface.
Technical data
HADA 5100 SPTS module
Headends
Type
Art. No.
LAN interface
Standard
CCs HADA 5100 SPTS
325188
10-BASE-T, IEEE 802.3i
100-BASE-TX, IEEE 802.3u
1000-BASE-X, IEEE 802.3z
CCs HADA 5100
325189
10-BASE-T, IEEE 802.3i
100-BASE-TX, IEEE 802.3u
1000-BASE-X, IEEE 802.3z
Data rate MBit 17 (5 - 270 MHz)
Connections
LAN 1 RJ 45 socket 1 RJ 45 socket
ASI inputs 5 BNC sockets 5 BNC sockets
ASI output
1 BNC socket
Connection strip (10-pin)
for supply voltages and control circuits
RS 232 socket
serial interface for software update
HADA 5100 module
Multiplexing from 5 ASI transport streams to 1 ASI
transport stream HADA 5100
This cassette is a 5 to 1 multiplexer. It converts 5 ASI/
SPTS/MPTS input channels to 1 ASI/MPTS output channel.
Every input channel is equipped (selectable) with an ASI
input and a LAN interface (1 input (IPTV) address).
The inputted data streams are individually edited and are
combined to one data stream with the TPS module.
The output of this data stream is at the ASI or LAN interface
(1 output (IPTV) address). This cassette can be allocated an
own hardware IP address for the operation in a LAN network.
Software update can be done via the RS-232 interface.
105