Gebrauchsanweisung Standard-Thermostat - Vasco
Gebrauchsanweisung Standard-Thermostat - Vasco
Gebrauchsanweisung Standard-Thermostat - Vasco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Boost cycle<br />
If you press the receiver button again after the receiver is connected,<br />
the boost cycle will start.<br />
The LED on the receiver will start flashing red.<br />
Note:<br />
Boost is a command that heats the radiator to maximum output<br />
for 1 hour – this can be interrupted – regardless of the<br />
room temperature.<br />
After 1 hour, the boost switches off and the thermostat sets<br />
the comfort temperature.<br />
!!! You do not have to switch on the thermostat in order to select<br />
the boost cycle.<br />
Press the receiver button a third time to switch the boost cycle off.<br />
<strong>Thermostat</strong> LED<br />
• Red: thermostat on<br />
• Flashing red: batteries almost flat.<br />
• Flashing green: radio transmission<br />
UK<br />
16<br />
standard_boekje_V1.indd 16 02-12-2009 15:34:1