Series TY-B - Tyco Fire Products

More documents

Recommendations

Info

Page 4 of 8 TFP151_EN K TYPE TEMP. 40 1/2” NPT 80 1/2” NPT 115 3/4” NPT 115 1/2” NPT PENDENT (TY1251) and UPRIGHT (TY1151) PENDENT (TY3251) and UPRIGHT (TY3151) RECESSED PENDENT (TY3251)* Figure 4 PENDENT (TY4251) and UPRIGHT (TY4151) RECESSED PENDENT (TY4251)* Figure 5 PENDENT (TY4951) and UPRIGHT (TY4851) BULB LIQUID 57°C (135°F) Orange 68°C (155°F) Red 79°C (175°F) Yellow 93°C (200°F) Green 141°C (286°F) Blue NATURAL BRASS CHROME- PLATED 1,2,3 182°C (360°F) Mauve 1,2 57°C (135°F) Orange 68°C (155°F) Red 79°C (175°F) Yellow 93°C (200°F) Green SPRINKLER FINISH (See Note 8) WHITE *** POLYESTER LEAD COATED 1,2,3,4,5,6,7 1,2,3,5 WAX COATED N/A WAX OVER LEAD COATED 1,2,3,5 1,2,3,5 141°C (286°F) Blue 1**,2**,3**,5** 1**,2**,3**,5** 182°C (360°F) Mauve N/A 57°C (135°F) Orange 68°C (155°F) Red 79°C (175°F) Yellow 93°C (200°F) Green 141°C (286°F) Blue 1,2 57°C (135°F) Orange 68°C (155°F) Red 79°C (175°F) Yellow 93°C (200°F) Green 1,2,3,4,5 1,2,4,5 1,2,3,4,5,6,7 1,2,5 N/A 1,2,3,5 1,2,5 141°C (286°F) Blue 1**,2**,3**,5** 1**,2**,5** 182°C (360°F) Mauve N/A 57°C (135°F) Orange 68°C (155°F) Red 79°C (175°F) Yellow 93°C (200°F) Green 1,2,3,4,5 141°C (286°F) Blue 1,2 57°C (135°F) Orange 68°C (155°F) Red 79°C (175°F) Yellow 93°C (200°F) Green 141°C (286°F) Blue 182°C (360°F) Mauve N/A 1,2,3,5 N/A NOTES: 1. Listed by Underwriters Laboratories, Inc. (UL) 2. Listed by Underwriters Laboratories, Inc. for use in Canada (C-UL) 3. Approved by Factory Mutual Research Corporation (FM) 4. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 007k/03) 5. Approved by the City of New York under MEA 354-01-E 6. VdS Approved (For details contact Tyco Fire & Building Products, Enschede, Netherlands, Tel. +31-53-428-4444/Fax +31-53-428-3377) 7. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 094a/05) 8. Where Polyester Coated, Lead Coated, Wax Coated, and Wax over Lead Coated Sprinklers are noted to be UL and C-UL Listed, the sprinklers are UL and C-UL Listed as Corrosion Resistant Sprinklers. Where Lead Coated, Wax Coated, and Wax over Lead Coated Sprinklers are noted to be FM Approved, the sprinklers are FM Approved as Corrosion Resistant Sprinklers * Installed with Style 10 (1/2” NPT) or Style 40 (3/4” NPT) 3/4” Total Adjustment Recessed Escutcheon, as applicable ** 66°C (150°F) Maximum Ceiling Temperature TABLE A ,LABORATORY LISTINGS AND APPROVALS
TFP151_EN Page 55 of 8 K K 40 2.8 1/2” 1/2" NPT NPT 80 1/2” 5.6 NPT 1/2" NPT 115 3/4” NPT 8.0 3/4" NPT 115 1/2” NPT SPRINKLER SPRINKLER FINISH FINISH TYPE NATURAL NATURAL CHROME-PLA- WHITE WHITE LEAD TYPE LEAD COATED BRASS BRASS TEDPLATEDPOLYESTER COATED WAX WAX COATED COATED PENDENT PENDENT (TY1251) (TY1251) and and 12,1 bar 175 (175 PSI psi) (12,1 BAR) N/A UPRIGHT (TY1151) N/A UPRIGHT (TY1151) PENDENT (TY3251) and PENDENT (TY3251) 17,2 bar (250 psi) 12,1 bar (175 psi) UPRIGHT (TY3151) and 250 ORPSI (17,2 BAR) 175 PSI (12,1 BAR) RECESSED UPRIGHT PENDENT (TY3151) 12,1 bar (175 OR psi) (SEE 175 NOTE PSI 1) N/A (TY3251) (12,1 BAR) RECESSED PENDENT PENDENT (TY4251) (TY3251) N/A and (SEE NOTE 1) 12,1 bar (175 psi) UPRIGHT (TY4151) PENDENT (TY4251) RECESSED PENDENT and (TY4251) UPRIGHT (TY4151) 12,1 bar (175 psi) 175 PSI (12,1 BAR) N/A PENDENT (TY4951) RECESSED and PENDENT UPRIGHT (TY4851) (TY4251) 12,1 bar (175 psi) 175 PSI (12,1 BAR) N/A WAX OVER LEAD COATED NOTE: 8.0 PENDENT (TY4951) 1. The 1/2" maximum working and pressure of 17,2 bar (250 psi) only applies to the Listing 175 by PSI Underwriters (12,1 BAR) Laboratories, Inc. (UL); the Listing by Underwriters NPT Laboratories, UPRIGHT Inc. (TY4851) for use in Canada (C-UL); and, the Approval by the City of New York. NOTE: 1. The maximum working pressure of 250 psi TABLE (17,2 bar) B, MAXIMUM only applies WORKING to the ListingPRESSURE by Underwriters Laboratories, Inc. (UL); the Listing by Underwriters Laboratories, Inc. for use in Canada (C-UL); and, the Approval by the City of New York. TABLE B, MAXIMUM WORKING PRESSURE Technical Data Approvals Data UL and C-UL Listed. FM, Approvals LPCB, VdS, and NYC Approved. (Refer UL and to C-UL Table Listed. A for complete approval information FM, LPCB, including VdS, andcorrosion NYC Approved. resistant status.) (Refer to Table A for complete approval information including corrosion Maximum resistant Working status.) Pressure Refer Maximum to Table Working B. Pressure Discharge Refer to Table Coefficient B. 40,3 Discharge l/min.bar 0,5 Coefficient (2.8 usgpm/psi 0,5 ) 80,6 K = l/min.bar 2.8 GPM/psi 0,5 (5.6 1/2 usgpm/psi (40,3 LPM/bar 0,5 ) 1/2 ) 115,2 K = 5.6 l/min.bar GPM/psi 0,5 (8.0 1/2 usgpm/psi (80,6 LPM/bar 0,5 ) 1/2 ) K = 8.0 GPM/psi 1/2 (115,2 LPM/bar 1/2 ) Temperature Ratings Refer Temperature to Table A Ratings Refer to Table A. Finish Sprinkler: FinishesRefer to Table A. Recessed Sprinkler: Escutcheon: Refer to Table White Coated, A. Chrome Recessed Plated, Escutcheon: Brass PlatedWhite Coated, Chrome Plated, or Brass Plated. Physical Characteristics Frame............................................................Bronze Physical Characteristics Button.............................................Brass/Copper Frame . . . . . . . . . . . . . Bronze Button . . . . . . . . . Brass/Copper Sealing Sealing Assembly.................................................. Assembly . . . . . . . . . . ................................ . . . . . Beryllium Beryllium Nickel Nickel w/Teflon† w/Teflon* Bulb..................................................................Glass . . . . . . . . . . . . . . . Compression Screw.................................... . . . . . Bronze Brass Deflector....................................................Copper . . . . . . . . . . . Bushing (K40)............................................Bronze (K=2.8) . . . . . . . *Registered trademark of DuPont. Operation The glass Bulb contains a fluid which The expands glass bulb when contains exposed a fluid to that heat. expands When when the rated exposed temperature to heat. When is reached, the rated temperature fluid expands is reached, sufficiently the fluid to expands shattersuffi- the the ciently glass to Bulb, shatter allowing the glass the bulb, sprinkler activating to the activate sprinkler and and water allowing to flow. water to flow. Design Criteria Criteria The Series TY-B Pendent and Upright Sprinklers The are Series intended TY-B for Pendent fire protection and Upright systems Sprinklers are intended for fire protection systems designed in accordance designed with in accordance the standard installation with the standard rules recognized installationby rules the recognizedListing by the or applicable Approval agency Listing(e.g. or applicable UL Approval Listing is agency based on (e.g., the requirements UL Listing of is NFPA based 13, on and the FM requirements Approval is based of NFPA on the requirements 13, and FMof Approval FM’s Loss isPrevention based Data the Sheets). requirements Only the ofStyle FM’s10 Loss or 40 Prevention Recessed Escutcheon, Data Sheets). as applicable, Only the is Style to be 10 used or 40 for recessed Recessed pendent Escutcheon, installations. as applicable, is to be used for recessed pendent installations. Installation The Series TY-B Sprinklers must be installed in accordance with the following instructions: NOTES Do not install any bulb type sprinkler if the bulb is cracked or there is a loss of liquid from the bulb. With the sprinkler held horizontally, a small air bubble should be present. The diameter of the air bubble is approximately 1,5 mm (1/16”) for the 57°C (135°F) to 2,5 mm (3/32”) for the 182°C (360°F) temperature ratings. A leak tight 1/2” NPT sprinkler joint should be obtained with a torque of 10 to 19 Nm (7 to 14 ft.lbs.). A maximum of 29 Nm (21 ft. lbs.) of torque may be used to install sprinklers with 1/2 NPT connections. A leak tight 3/4” NPT sprinkler joint should be obtained with a torque of 13 to 37 Nm (10 to 20 ft.lbs.). A maximum of 41 Nm (30 ft.lbs.) of torque is to be used to install sprinklers with 3/4 NPT connections. Higher levels of torque may distort the sprinkler inlet and cause leakage or impairment of the sprinkler. Do not attempt to make-up for insufficient adjustment in the escutcheon plate by underor over-tightening the sprinkler. Readjust the position of the sprinkler fitting to suit. † DuPont Registered Trademark
Page 1 and 2: Technical Services: Tel: (800) http
Page 3: TFP151_EN Page Page 3 3 of of 8 ES
Page 7 and 8: TFP151_EN Page Page 7 7 of of 8 ov

Series TY-B - Tyco Fire Products

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?