Download

Migrating to IHO Certificate for S-63 1.1 in
Kelvin Hughes ECDIS
This guide is based on the KH Manta ZM-1816 v3.9.3

Migrating to IHO certificate for S-63 1.1 2
1 Migrating from PRIMAR.CRT to IHO.CRT
To install S-63 1.1 Data the latest IHO certificate will need to be installed in your ECDIS. The
IHO.CRT is located on any AVCS S-63 1.1 Media. To install it please insert the S-63 1.1
Media into your ECDIS and follow the steps below:
1. In the “Chart Maintenance” window, select the “Chart Licence” Tab
2. Select the “Install Certificate from Removable Media” Tab
1.
2.
3. The system will automatically scan for available certificates, Select the IHO.CRT
3.

Migrating to IHO certificate for S-63 1.1 3
4. Select OK to confirm the installation
4.
The IHO.CRT has now been installed and S-63 1.1 data can be loaded into the ECDIS.
2 R everting to PR IMAR .CR T
If for any reason the migration to S-63 1.1 fails then the PRIMAR.CRT file will need to be reinstalled.
To do this insert any AVCS S-63 1.0 Media into your ECDIS and follow the same
process as described above except this time selecting the PRIMAR.CRT
Your system will now be in the same state as before attempting the upgrade and you can
continue to use AVCS S-63 1.0 data. However, you should inform your Admiralty Chart
Agent of the problems that you have encountered.
UKHO 2013 All Rights Reserved
The copyright in this document, which contains information of a proprietary nature, is vested in UKHO.
The content of this document may not be used for purposes other than that for which it has been supplied
and may not be reproduced, either wholly or in part, in any way whatsoever.