product guide cr-h, crn-h, cre-h, crne-h
product guide cr-h, crn-h, cre-h, crne-h
product guide cr-h, crn-h, cre-h, crne-h
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Accessories<br />
CR-H, CRN-H, CRE-H, CRNE-H<br />
Grundfos CR(E)-H, CRN(E)<br />
baseplate<br />
Grundfos CR(E)-H, CRN(E)-H baseplates can be<br />
selected by using the information on the following<br />
pages. Once you have selected your pump you can use<br />
the pump data to select the proper baseplate and motor<br />
mounting kit. You will need to know the flange<br />
connection code, motor frame size and the E4 pump<br />
length.<br />
Based on this information you can select your baseplate<br />
and motor mounting kit number.<br />
You will need to make sure that your pump length will<br />
fit on the standard baseplate by comparing the E4 - 4"<br />
dimension to the maximum pump length. If it will not,<br />
you can select the long baseplate (XLBP). The XLBP<br />
baseplates are longer than ANSI B73.1 baseplates but<br />
have floor mounting holes at the standard lengths.<br />
XLBP baseplates also have additional holes near the<br />
end as shown in the dimensional table.<br />
Baseplate dimensional sketch - CR(E), CRN(E) 1s, 1, 3, 5 H<br />
Baseplate dimensional sketch - CR(E), CRN(E) 10, 15, 20 H<br />
Baseplate dimensional sketch - CR(E), CRN(E) 32, 45, 64, 90 H<br />
TM04 4641 1809<br />
TM04 4640 1809<br />
TM04 4639 1809<br />
103