Rider's Manual K 1200 R - K100.biz
Rider's Manual K 1200 R - K100.biz
Rider's Manual K 1200 R - K100.biz
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
z Maintenance<br />
Clamping screw for<br />
quick-release axle in<br />
wheel carrier<br />
19 Nm<br />
Remove the front-wheel stand.<br />
Ease the brake calipers on to<br />
the brake discs.<br />
with OE BMW Motorrad Integral<br />
ABS:<br />
The cable of the ABS<br />
sensor could chafe through<br />
if it comes into contact with the<br />
brake disc.<br />
Make sure that the ABS sensor<br />
cable is routed correctly.<br />
Carefully route the ABS cable.<br />
Make sure that the ABS<br />
sensor cable is clipped into<br />
holders 8.<br />
Install securing screws 3.<br />
Front brake caliper to<br />
wheel carrier<br />
30 Nm<br />
Remove the adhesive tape<br />
from the wheel rim.<br />
Firmly pull the handbrake lever<br />
until the pressure point is perceptible,<br />
and repeat this operation<br />
several times.<br />
Position covers 2 on left and<br />
right.<br />
Install screws 1 on left and<br />
right.<br />
Remove the rear wheel stand,<br />
if installed beforehand.<br />
Removing rear wheel<br />
Place the motorcycle on an<br />
auxiliary stand; BMW Motorrad<br />
recommends the BMW Motorrad<br />
rear-wheel stand.<br />
Install the rear-wheel stand<br />
( 117)<br />
8<br />
111