Rider's Manual K 1200 R - K100.biz
Rider's Manual K 1200 R - K100.biz
Rider's Manual K 1200 R - K100.biz
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
8<br />
Switch off the ignition.<br />
124<br />
z Maintenance<br />
Install screw 1.<br />
Install the seat ( 67)<br />
Replacing turn indicator<br />
bulbs, front and rear<br />
If it is not standing firmly,<br />
the motorcycle could topple<br />
in the course of the operations<br />
described below.<br />
Always make sure that the<br />
motorcycle is stable and firmly<br />
supported.<br />
Make sure the ground is level<br />
and firm and place the motorcycle<br />
on its stand.<br />
Remove screw 1.<br />
Pull the turn indicator glass out<br />
of the turn indicator housing at<br />
the threaded-fastener side.<br />
Press bulb 2 into fitting 3 and<br />
remove by turning it counterclockwise.<br />
Replace the defective bulb.<br />
Bulbs for flashing turn<br />
indicators, front<br />
R10W / 12 V / 10 W<br />
with OE White turn indicators:<br />
RY10W / 12 V / 10 W<br />
Bulbs for flashing turn<br />
indicators, rear<br />
R10W / 12 V / 10 W<br />
with OE White turn indicators:
Change language