Plug & Play - HUBER

chiller ® or Unichiller ®
Unichiller ® with CC-Pilot ®
The tower models offer power with small footprints.
These models are fitted with the exchangeable Compatible
Control CC-Pilot, and are used in both research
and production, the range of cooling powers
available is from 1,6 to 100 kW.
Features
K Space saving tower design: small dimensions,
high powers
K Robust stainless steel construction
K Reliable continuous operation with alarm and
early warning functions
K CC-Pilot with Plug & Play Technology
K Splash protection of display and function keys
K Large and bright TFT display
K Digital level indicator
K Simple to fill and drain
K Simple to use EASY Control, with rotary input
and function keys
K All functions listed alphabetically
K RS232 interface and connection for optional
Com.G@te (NAMUR Standard)
K Strong pumps for systems with large pressure
drops
K High flow rates for optimal heat transfer
K External Pt100 sensor via 4-wire Lemo
connector
K 5-Point calibration
K IP-class to IEC EN 60529: 21
K Options (factory fitted)
– Heater and adjustable over temperature
protection
– VPC (Variable Pressure Control) with steplessly
variable bypass and pressure sensor
– Winter operation for use in low temperature
external environments
– Weather protection
– Tropical versions for environmental temperature
up to 45 °C
– Stronger pumps
Introduction | Unichiller ® • Minichiller ® • RotaCool ®
Unichiller ® with MPC ® -Controller
Compact, value-for-money units; Unichillers are available with
cooling powers up to 2,5 kW for applications in the lab. The
models ranging from the Minichiller to UC025w are suitable for
on or under the lab bench.
Options for Heating and
Temperatures to +100 °C
With the exception of the two models UC006Tw-NR and
UC009Tw-NR all units can be factory fitted with optional heating
and independent over-temperature protection. Increasing the
maximum working temperature to 100 °C and the temperature
stability to ± 0,2 K. The new construction allows constant operation
in ambient temperatures up to 40 °C. The water-cooled models
are especially quiet and require little cooling water even at
full cooling power. Despite the increasing costs of water the ROI
is exceptionally short. All models with maximum pump pressure
of 2,5 bar have an adjustable bypass and a pressure gauge.
Pump Options
We offer alternative pumps for applications with higher pressure
drops.
Models with Pump A are only suitable for externally closed systems.
Models with Pumps B, C and D can also be configured for
operation with external open systems.
The quoted technical data is indicative, and will vary slightly
depending on the model.
Pump Pump duty (l/min) at (bar)
0,2 0,5 1,0 2,0 2,5 3,0 4,0
A 20 10 – – – – –
B* – 21 17 6 – – –
B1* – 40 35 28 24 20 10
C3** – – 65 60 45 40 25
C4** – – 80 75 75 60 30
D3** – – 170 160 140 130 90
* Stronger pump options available from UC ® 017T / UC ® 017Tw
** Pump suitable for UC ® 055T / UC ® 055Tw and above
Note: The fitting of a more powerful pump reduces the cooling
power by the following amounts: Pump B1 for B = 150 W; C4 for
C3 = 400 W; D3 for C3 = 750 W; D3 for C4 = 350 W.
In a few cases it may be necessary to use larger machine housing.
45
Chillers