Plug & Play - HUBER

Heat Transfer Station (HTS)
The HTS has no mechanical refrigeration but is fitted
with a circulation pump, a plate heat exchanger and
the CC­Pilot controller. This compact circulator provides
low cost cooling with a predictably stable pressure
and flow to the application. As no mechanical refrigeration
system is fitted (compressor etc.), the
machine is silent, efficient and energy saving. It offers
an economic alternative to standard circulators when
a chilled water supply is already available. The HTS
heat exchanger is suited for temperature control of
bio reactors, condensers, rotary evaporators, vapour
traps etc.
Advantages
K Efficient circulation pump
K CC­Pilot controller
K RS232 interface
K Pt100 external sensor connection
K Efficient thermal transfer
K Low cooling water usage
K Application protection with cooling stage
separation
| PS5 |
Models | Hotbox • Heat Transfer Station
Model Operating Pump Cooling Power2 Heating Power Dimensions Cat.No. G Price
Temperature Range Flow Rate max. Pressure at 20°C OPTIONAL W x D x H
(°C) (l/min) (bar) (kW) (max. kW) 3 (mm)
HTS PS11 5...80 5 0,2 0,6 – 280 x 427 x 414 3011.0008.04 2
HTS PS3 5...80 33 0,7 3,0 2 280 x 491 x 414 3011.0001.04 3
HTS PS5 5...80 25 2,5 5,0 2 280 x 491 x 414 3011.0006.04 3
HTS PS6 5...80 25 2,5 6,0 10 400 x 491 x 529 3011.0002.04 3
HTS PS15 5...80 25 2,5 15,0 10 400 x 491 x 529 3011.0010.04 4
1 2 3 air cooled Cooling power data measured with cooling water-inlet temperature of 10 °C and 2 bar Optionally available on request with heating and over temperature protection
83
Specials