Plug & Play - HUBER

Accessories for Circulators Accessories
Calibration inserts
Calibration insert Cat.No. G Price
ministat ® 125, ministat ® 125w 6806 2
ministat ® 230, ministat ® 230w 6807 2
ministat ® 240, ministat ® 240w 6808 2
CC ® -410wl
CC
6294 2
® -510, CC ® -510w, CC ® -515w, CC ® -520,
CC ® -520w, CC ® -525w, CC ® -820, CC ® -820w 6496 2
CC ® -515, CC ® -905, CC ® -905w, CC ® -906w 6150 2
CC ® -308B 9355 1
CC ® -315B 6126 1
Function principle
The thermal fluid at constant temperature flows through the
heat exchanger (A) and via the distributor pipe (B) down into
the calibrating bath. Temperature fluctuations in the thermostat
are evened out in (A). The entire system acts as a calorimeter.
There are virtually no gradients and no delay in the
case of swift ramps. Temperature stability can be improved by
a factor of 5 to 10.
The calibration baths in combination with Unistats (page 81)
work in the same principle.
Displacement inserts
Displacement insert Cat.No. G Price
ministat ® 125, ministat ® 125w 6818 2
ministat ® 230, ministat ® 230w 6819 2
ministat ® 240, ministat ® 240w 6820 2
CC ® -410wl
CC
6293 2
® -510, CC ® -510w, CC ® -515w, CC ® -520,
CC ® -520w, CC ® -525w, CC ® -820, CC ® -820w 6049 2
CC ® -515, CC ® -905, CC ® -905w, CC ® -906w 6050 2
CC ® -308B 31973 1
CC ® -315B 6043 1
CC ® -205B 6041 1
Simple options to boost performance
Displacement inserts:
K Reducing the bath volume reduces the thermal
load and leads to faster ramping times.
K Reduce the liquid´s exposed surface area, which
reduces moisture absorption.
K Contain the expansion volume HTF and prevent
the bath from overflowing.
93
Accessories