Plug & Play - HUBER

Flexible solutions for calibration
in production
High Precision Calibration
Calibration is a comparison between a measurement
system and a reference or standard. During the comparison
it is established how large the deviation between
the two values or if the value lies within the
specified limits. Calibration is normally carried out in
accordance with rigorous national or international
standards.
Meaningful and comparable measurements around
the world require calibrated instruments. The quality
of measurements is defined in terms of tolerance
and repeatability, and is only achievable with the use
of calibrated measurement devices or by adjusting
sensors.
Calibration baths are used in quality management
departments of industry and research. The modular
concept based on the combination of a calibration
bath with a Unistat, which dictates the temperature
range and speed of temperature change. The stainless
steel calibration bath is designed in a similar format
to a calorimeter to ensure temperature homogeneity.
Baths with a 118 mm diameter and depth of
Models | Accelerated Forced ageing test • Calibration
384 mm are offered for calibration of measurement
and control sensors. The calibration space is freely accessible
and symmetrical. The upper edge is designed
to allow exact reading of the temperature measured
by glass thermometers and also offers a tight seal for
the customer specific bath lid. Special calibration
software in the circulator and the self-optimising controller
with TAC Technology mean short times between
the different calibration temperatures. The calibration
space of the baths can be customised to suit
specific customer requirements.
Advantages
K Highest temperature stability up to ± 0,002 °C
K Temperature homogeneity better than ± 0,01 °C
K External overflow vessel
K 5-point calibration of the control sensor
See page 93 for the calibration inserts for our bath
thermostats.
Model Temperature Pump Dimensions Bath Cat.No. G Price
Range Connection W x D x H Opening Depth Volume
(°C) (mm) (mm) (mm) (ltr)
Cal 700 -100...400 M30x1,5 300 (440*) x 300 x 566 Ø118 384 7,0 9623 3
* with external overflow vessel (140 mm)
Cal 700 – Calibration bath for
measurement and control sensors
81
Specials