02.11.2014 Views

Data sheet Optical read-out head

Data sheet Optical read-out head

Data sheet Optical read-out head

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Data</strong> <strong>sheet</strong><br />

<strong>Optical</strong> <strong>read</strong>-<strong>out</strong> <strong>head</strong><br />

Designed for use with INFOLOG handterminal<br />

or PC for re-programming<br />

Complies with IEC 1107/EN 61107<br />

Flow Division<br />

SONOCAL ultrasonic heat meter<br />

Introduction<br />

Description<br />

The optical <strong>read</strong>-<strong>out</strong> <strong>head</strong> is used together with INFOLOG to <strong>read</strong>-<strong>out</strong> data or connected via a PC<br />

for re-programming of INFOCAL 5.<br />

<strong>Data</strong> transmitting uses infrared light in the two way communication.<br />

Due to low power consumption whenever communication takes place, the position of the optical<br />

<strong>head</strong> on the INFOCAL 5 must be accurate and with the cable turning downwards against the<br />

cable inlet on the INFOCAL 5<br />

Note<br />

The <strong>read</strong>-<strong>out</strong> <strong>head</strong> contents a strong magnet in order to keep position on the INFOCAL 5.<br />

Keep the <strong>read</strong>-<strong>out</strong> <strong>head</strong> away from any diskettes or computers as it may damage data.<br />

Technical data Baud rate 300/600 bau/sec.<br />

Ambient temperature<br />

-10°C…+55°C<br />

Storage temperature<br />

-20°C…+70°C<br />

Enclosure IP 53<br />

Cable length<br />

1.5 meter<br />

Dimension<br />

Diameter 32 x 25 mm<br />

Weigth<br />

0.1 kg<br />

Magnet material<br />

Ferrite<br />

Plug<br />

9 pole D-sub.<br />

Ordering Description Code No.<br />

<strong>Optical</strong> <strong>read</strong> <strong>out</strong>-<strong>head</strong><br />

087H0108<br />

SAP No. <br />

DKFD.PD.022.H1.02


The Danfoss Flow range contains:<br />

MAGFLO electromagnetic flowmeters<br />

MAGFLO flowmeters are used for all electrically conductive<br />

liquids.<br />

A wide range is offered for:<br />

The water treatment sector – enclosures are IP 67 as standard.<br />

The chemical industry – Ex-approved and other versions<br />

available.<br />

The food industry – stainless steel and other versions<br />

available.<br />

SONOFLO ultrasonic flowmeters<br />

SONOFLO flowmeters measure flow in full pipes.<br />

SONOFLO flowmeters measure media in liquid form, irrespective<br />

of electrical conductivity.<br />

The range includes a one- to four-track flowmeter, SONO 3000.<br />

The meter is also available in a compact Ex-version.<br />

SONOFLO flowmeters can also be installed on existing pipes,<br />

providing low cost installations, especially where large pipes are<br />

concerned.<br />

MASSFLO mass flowmeters<br />

MASSFLO flowmeters measure flow direct in kg/h. In addition,<br />

MASSFLO flowmeters measure:<br />

Density<br />

Temperature<br />

Sugar concentration i.e. Brix<br />

MASSFLO flowmeters are available in stainless steel, Hastelloy<br />

and with integrated heating.<br />

MASSFLO flowmeters can be obtained in an intrinsically safe<br />

version for explosive areas.<br />

SONOCAL ultrasonic heat meter<br />

SONOCAL serie 3000 ultrasonic heat meter.<br />

SONOCAL serie 2000 ultrasonic heat meter.<br />

MASSFLO , MAGFLO , SONOFLO , SONOCAL and SENSORPROM are registered Danfoss trademarks.<br />

SAP No. 521H1111<br />

DKFD.PD.022.H1.02<br />

Danfoss A/S (FD-SE/KN&SSS) 06.2001 P65

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!